Black Box shuts down with Stick plug-in
Moderator: AdminGroup
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
Re: Black Box shuts down with Stick plug-in
When I connect the first board inside the base only, the LED comes on and I get lights on the BB. When I connect the second board (with or without the stick plugged into that board), the BB lights go out.
I also lose the input to the cfg panel when the second board is plugged in.
No obvious burns, melting, shorts in the board or wiring.
I also lose the input to the cfg panel when the second board is plugged in.
No obvious burns, melting, shorts in the board or wiring.
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
Re: Black Box shuts down with Stick plug-in
When I plug in the first board inside the base, the LED comes on and the lights are on on the BB.
When I plug in the second board (with or without the stick plugged into that board), the lights go off.
Config screen does not show any devices when all plugged in.
When I plug in the second board (with or without the stick plugged into that board), the lights go off.
Config screen does not show any devices when all plugged in.
-
- Posts: 3583
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 46 times
- Been thanked: 698 times
Re: Black Box shuts down with Stick plug-in
This means that a short circuit occurs when the GF board is connected and the BB controller goes into protection.
Step by step you need to find out where it happens.
Is the handle connected? If yes, then disable it. Disconnect the Grip cable on the board and connect the board to the front one with the green LED.
You need to unscrew the board from the mechanics and connect. Maybe something is shorting underneath.
Step by step you need to find out where it happens.
Is the handle connected? If yes, then disable it. Disconnect the Grip cable on the board and connect the board to the front one with the green LED.
You need to unscrew the board from the mechanics and connect. Maybe something is shorting underneath.
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
Re: Black Box shuts down with Stick plug-in
Removed the board. There is nothing underneath besides the plug for the joystick. No exposed wiring or circuitry
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
Re: Black Box shuts down with Stick plug-in
Disconnected the Harness between boards, all OK.
Disconnected the joystick harness, and still shorts the BB.
Disconnected the joystick harness, and still shorts the BB.
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
Re: Black Box shuts down with Stick plug-in
I purchased directly from VKB. I do not see a method to order replacement parts or the board on the web page. Is there a "backdoor" to order parts?
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
Re: Black Box shuts down with Stick plug-in
I think I figured it out. Thanks.
Any other suggestions to DIY repair?
Any other suggestions to DIY repair?
- fallout9
- Posts: 5468
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 222 times
- Been thanked: 1271 times
Re: Black Box shuts down with Stick plug-in
We have multiple stores covering different areas. If you are in US, then log into your account and fill up a service ticket; attach a link to this thread to save some time.
-
- Posts: 18
- Joined: Fri May 13, 2022 14:51
Who is online
Users browsing this forum: Google [Bot] and 20 guests