Joystick gets renamed

[TheBanjolorian]

Hello! After update to 2,09 for the gladiator NXT When i activate f13-f24 on the left joystick it gets renamed from left to right in the Software. When i reset the joystick it jumpa back to left again.

Tried this with the same result for 5x times.

Everything works, But yeah

[fallout9]

Follow these steps:
1. Download the configurator;
2. Download the bootloader;
3. Download the firmware package;
4. Unzip all the 3 files in the same folder;
5. Launch VKBDevCfg as Admin and click the Bootloader button under Tools tab;
6. Navigate to the firmware file folder and load up the file called _Gladiator_NXT_v2_09_0.vkb;
7. After the bootloader finishes the flashing process launch VKBDevCfg and click the Default button under Tools tab;
8. Navigate to Global/Devices/External Devices and press the Find&AutoConfig button;
9. Go to Test/Axes1 tab and click on the Start Calibr button;
10. Move your pitch, roll and yaw axes all the way, slowly at the end;
11. Move the mini-throttle up and down;
12. Press the A1 ministick center button and when the LED turns red move the ministick all over;
13. Press the End Calibr button.

[TheBanjolorian]

Thank you, i needed under external devices to set it manually to SCG-L and now it works fine

[fallout9]

Does the ministick works, can you switch modes?

[TheBanjolorian]

The left is not a premium.. but strange things have happen
when i click the fire (button 1) on the joystick. on the button tester the button 10 reacts. same in game

[fallout9]

Number of button doesn't matter that much, as long as the button works. But I still suggest to follow the above steps.