1) Download and unzip:
- Profile for T-Link support http://ftp.vkb-sim.pro/Profiles/BlackBo ... 1_81_6.zip
- T-Link v.0.66.2 http://ftp.vkb-sim.pro/Programms/T_link_v0_66_2.zip
- VKBDevCgf-C v.0.78.9.9 http://ftp.vkb-sim.pro/Programms/VKBDev ... 78_9_9.zip
- VkbJoyTester http://ftp.vkb-sim.pro/Programms/VKB_JoyTester.zip
2) Run VkbDevCfg-C and load the profile to the controller:
- Click on the BlackBox controller name
- Click on the "Load" button
- Click on the "Set" button
- Close VkbDevCfg-C
3) Run T-Link
- Click on the "SET" square button (left side)
- Press a button on the joystick for "brake" function
- Click on the "Start/Stop" button (T-link start to send data to the BlackBox)
4) For test the brakes run vkbJoyTester (or can use Windows gaming controller applet). Choose the BlackBox controller. Press the "Brake" button on the joystick and move the pedals.
P.S. Never run T-Link and VkbDevCfg-C together!
How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
Moderator: AdminGroup
Re: How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
Warpig wrote:Will this work for the Mk.III?
Moreover it will work for other versions of firmware and VKBDevCfg too.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
I am an owner of Gunfighter II + MCG PRO + Pedals IV. Unfortunately, when I try to use T-Link profile provided, I have "Non-compatible profile warning".
Any tricks how to make it work?
Any tricks how to make it work?
-
- Posts: 3288
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 45 times
- Been thanked: 639 times
Re: How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
Look closely at the pictures. MCG uses 7 axes +1 on the second virtual controller. Using T-link, we, except 7 (main), we also use 6 and 8 axles for separate brakes. But they are already occupied by the axes of the microstick and the brake lever. They need to be released and configured for separate brakes. Not to mention the rest of the setting.
Re: How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
Thank you. Will try these settings.
-
- Posts: 3288
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 45 times
- Been thanked: 639 times
Re: How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
We use firmware above 1.93B, take it here and here configurator.
You need to connect the T-Rudder directly to the BlackBox Gunfighter, and configure the virtual brakes.
In the screenshot, these changes are highlighted. After that, you do not need to use the T-Link program.
The brake lever on the MCG sets the total brake force (adjustable), and the T-Rudder axis releases the corresponding wheel (also dosed).
You need to connect the T-Rudder directly to the BlackBox Gunfighter, and configure the virtual brakes.
In the screenshot, these changes are highlighted. After that, you do not need to use the T-Link program.
The brake lever on the MCG sets the total brake force (adjustable), and the T-Rudder axis releases the corresponding wheel (also dosed).
Re: How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
Thank you for the help!
Everything works great even without T-Link software, the trick was to use this new firmware, which is not available on ftp site.
Everything works great even without T-Link software, the trick was to use this new firmware, which is not available on ftp site.
Re: How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
i have MKII MCG Pro 3 with -Rudde MKIV, how i can set the virtual brake?
PS it's all connect at 1 blackbox
The T-Link don't recognize the T-Rudder. Why?
I want to use the brake lever as a general brake, and the pedal axes to tack and brake on one axle only.
PS it's all connect at 1 blackbox
The T-Link don't recognize the T-Rudder. Why?
I want to use the brake lever as a general brake, and the pedal axes to tack and brake on one axle only.
L'importante non è stabilire se uno ha paura o meno, è saper convivere con la propria paura e non farsi condizionare dalla stessa. Ecco, il coraggio è questo, altrimenti non è più coraggio ma incoscienza.
Re: How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
Dear VKB,
It would be appreciated if you could make a tutorial video (like the ones published in Youtube) for the configuration of twist as rudder axis and with "pinkie" or another button as left and right pedal axes.
Best regards,
Robert
It would be appreciated if you could make a tutorial video (like the ones published in Youtube) for the configuration of twist as rudder axis and with "pinkie" or another button as left and right pedal axes.
Best regards,
Robert
Re: How to configure T-Rudders Mk.IV and T-Link for Virtual Toe Brakes
Please advise how to setup toe brakes in DCS. My hardware consists of T-Rudder and GNXT Premium stick. I saw the Gunfighter stick response, but I am wondering about the black box connection step with the GNXT, and also how to setup a toe brake on/off button with GNXT. Thanks.
Return to “Manuals and Howtos”
Who is online
Users browsing this forum: No registered users and 12 guests