Добрый день.
Как настроить тормоза на педалях? T-link пишет, что педали дисконект.
Как установить мягкий центр? Есть ли инструкция?
Информация по устройствам во вложении.
Gunfighter Mk.III (Rev.B) MCG Pro Twist + T-Rudder MkIV
Moderator: AdminGroup
- fallout9
- Posts: 5250
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 209 times
- Been thanked: 1230 times
Re: Gunfighter Mk.III (Rev.B) MCG Pro Twist + T-Rudder MkIV
If rudders and grip/base are using the same Black Box, then don't use T-Link.
If rudders are connected to their own Black Box then you can use T-Link.
MCG Pro with twist has 8 axes, which is max allowed by Windows. If you want to add rudders you have to lock the twist and flash the firmware without 'twist' in name. Then connect the rudders and recalibrate (rudders will replace twist).
Also, your firmware and software don't match; either get them both latest stable or both latest beta.
If rudders are connected to their own Black Box then you can use T-Link.
MCG Pro with twist has 8 axes, which is max allowed by Windows. If you want to add rudders you have to lock the twist and flash the firmware without 'twist' in name. Then connect the rudders and recalibrate (rudders will replace twist).
Also, your firmware and software don't match; either get them both latest stable or both latest beta.
Re: Gunfighter Mk.III (Rev.B) MCG Pro Twist + T-Rudder MkIV
fallout9 wrote: Also, your firmware and software don't match; either get them both latest stable or both latest beta.
Did you mean this? ...
fallout9 wrote:If rudders and grip/base are using the same Black Box, then don't use T-Link.
Ok. But where can I find settings like this? ...
- fallout9
- Posts: 5250
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 209 times
- Been thanked: 1230 times
Re: Gunfighter Mk.III (Rev.B) MCG Pro Twist + T-Rudder MkIV
Venom wrote:Did you mean this?
Yes, now they match.
Venom wrote:Ok. But where can I find settings like this?[/attachment]
Plug the joystick to USB through its own Black Box.
Plug the rudders to USB through their own Black Box.
Run T-Link.
Click mouse on button 1 (Accu) as in picture, then click the button on joystick you want to assign. Same to button 2 (Brakes).
Click mouse on Start/Stop, now it's running. Check in Tester.
Click mouse on button 4 as in picture to minimize the program and button 5 to turn it of.
Who is online
Users browsing this forum: No registered users and 18 guests