Virtual Mouse On / Off not working - "Always on" does

[mk2k21]

Hi,

I'm discovering VKB Device Config and I'm impressed - it's a very powerful piece of software.

I managed to turn on the virtual mouse but it only work when I set the "Active" combobox to "Always on".

If i set it to "On/Off" and bind a button to "Mice On/Off" it doesn't work, have I missed something or is it a bug?

VKBDevCfg: 0.91.78
FW: 2.03.0

Device: VKBsim Gunfighter MCG Ultimate Twist v2.025 Mk2

[Victorus]

I recommend to upgrade firm/software. Look at POVs tab. Your HAT must be enabled as mouse always.

Look at new mouse type r+a - relative+absolute and setpoints. Logical button function Set screen point allows to place cursor to assigned point immediately.

Try.

[mk2k21]

Thank you for your quick answer, but I can't find a newer version than 0.91.78 of vbkdevconfig.

I've checked here:

https://vkbcontrollers.com/?page_id=4609

and here:

http://ftp.vkb-sim.pro/Programms/VKBDevCfg-C/

And I took the latest firmware from here:

https://vkbcontrollers.com/wp-content/uploads/2021/01/v2_02_52.zip

I did not set the mouse from POVs the but directly in the "Common" tab as fallout9 suggested (I think) in another thread.

(I want full stick precision, setting it from POVs restricts you from 4-way or 8-way directions from what I understand)


mk2k21

[Victorus]

Alex_Oz storage
http://alex-oz.strana.de/

[mk2k21]

I've upgraded to the latest FW and VKBDevConf. Just curious, what does "XT" stand for? It think it's new..

Here are my observations:

1) Wow, it's a lot faster when using "Set"! The BlackBox reboots much, much quicker. Good job Alex_Oz!
2) Under the Mouse settings I cannot longer directly assign axes to the mouse. (before the upgrade I used axes 5 and 6 of the Gate Cont ministick)


Regarding (2) I'm already using POV2 as Buttons V output, that is why I was binding mouse directly to the Axis. Was the feature removed?

Thank you very much

[Victorus]

XT is traditional thread FW instead of NG - Next Gen. Explained by Alex.
Mouse controls migrated to Profile - POVs tab. See my config.

Note! I use only Y axis - for zoom control in Cliff of Dovers.
Look at User Guide for details
https://disk.yandex.ru/i/NQyFaGLlDT2CYw