MGCPRO Ultimate and changeable modules

[KPX]

Hello,

Ultimate is delivered with two changeable modules :
A. Mini stick module
B. Hat switch module.

Question : how do you distinguish MiniStick from HastSwitch ?

Changeable position on stick are :
SA. Master Mode
SB. Gate Cont.

Question is what can replace what ? What are authorized changed ?

Possible changes - which are allowed ?

1. all modules are interchangeable. Exemple MiniStick (A.) can replace Gate Cont or Master mode. Idem for HatSwtich (B.)
A. can replace SA. or SB. /// B. can replace SA. or SB.
2. MiniStick can only replace Master Mode and Hat Switch can only replace Gate Cont.
A. replaces SA. only /// B. replaces SB. only
3. Can I swap MasterMode and GateCont modules ? SA. can replace SB. ?

Thanks for helping.

Best regards.

[fallout9]

The hat switches modules could replace any of the ministicks modules, in any position, both or single.

[KPX]

Hello,
Thank you. clearer now.

Br

[Phoenix]

Thanks for the clarification.

May we have the exact process to switch the module. I saw the video, but it didn't explain all.

Here is what I do, but don't know if it's right.

1- Unplug the USB cable.
2- Change the module.
3- Plug the USB cable.
4- Flash the firmware.
5- Calibrate the MCG Pro Ultimate.

Is that the right process ?

Do we need to calibrate after each swap ?

[fallout9]

If you're properly flashed and calibrated and replacing at least 1 ministick with a HAT switch:
1. disconnect USB;
2. replace ministick(s);
3. plug USB;
4. play.

If you replace at least 1 HAT switch with a ministick:
1. disconnect USB;
2. replace HAT switch(es);
3. plug USB;
4. re-calibrate;
5. play.

[Phoenix]

Thank you for the answer.