Re: Gunfighter Pro-L MkIII Buttons stop working

Postby **fallout9** » Thu Apr 30, 2020 2:09

Connect the grip to the base (no extension), connect the Black Box to computer (no hub), delete all the old files and follow this guide https://youtu.be/fU4CbKhGm_w

gordon220 · Postby **gordon220** » Thu Apr 30, 2020 2:47

I saw the video earlier today. It's very well done.

However, I've done as it instructs three times with the same results "Err-Stat Active" and that's as far as I've been able to reach.
Black box has a steady blue light and a flashing red light. External devices test shows base connected but grip 100% red. I've triple checked the connections at the base and grip and I'm not using a usb hub.
I honestly do try to find the answers myself before bothering anyone in tech support. That's what led me to shorting the boot pins as a way to work on a clean slate.

Postby **fallout9** » Thu Apr 30, 2020 2:56

Please post 2 screenshots, first with Profile/ Axes panel, second with Test/ External Device panel.
Don't worry about ErrStat Active message, nothing wrong with that.

gordon220 · Postby **gordon220** » Thu Apr 30, 2020 3:03

Postby **fallout9** » Thu Apr 30, 2020 3:27

Open up the base and check all the white connectors, possibly some got loose when you opened it first time. Make sure they're all plugged in firmly.

gordon220 · Postby **gordon220** » Thu Apr 30, 2020 3:53

OK Checked the connections and plugged it back in to the pc. I have a red led on the pcb inside the case.
Tried to bootload config app with same result. Red light on black box flashing.

Went to config and clicked Bootloader device is recognized. Selected file and flash screen comes up with error msg "Must divide by Zero". I click OK and try again with same error. I try to close flash screen and get error msg "Unable to write to device" and it won't close. Have to close with task manager.

gordon220 · Postby **gordon220** » Thu Apr 30, 2020 5:40

I have an early doctor's appointment tomorrow morning. I'll leave you with the system report.

gordon220 · Postby **gordon220** » Thu Apr 30, 2020 7:54

Finally got it fixed with Zero Thunder's assistance.

Please download 1.zip from my oneDrive link. Put the files in one folder. ZBootloader-C.exe need to run as administrator.
https://1drv.ms/u/s!AuOyQzKR6XmsiwGa-4j ... ?e=p8sxQw+

1. Run VKBDevCfg-C
2. Go to Settings page and check the checkboxs. Auto Read..., Partial Write, Set After... should be checked.
3. Go to Tools page and click Bootloader
4. Select _BlackBox_GF_KG_v1_98_6.vkb
5. Click Flash It! and wait for it complite
6. After it resets, run VKBDevCfg-C
7. Go to Tools page and click Default
8. Go to Action page and click Load
9. Select KG12.cfg, and check Buttons only (important!)
10. Calibrate the joystick

VKB-SIM