Flashed w/ latest firmware; solid red light

[heckler82]

Hey all, I just recently flashed my Gunfighter Mk II MCG Pro to 1.94B. Ever since then the stick light on the black box is solid red as seen here:

The stick appears to be functioning normally. Is this something new or is it supposed to be solid green? Using VKB Dev C v0.87.90 (NJoy32 firmware v1.94.9) and Z-Bootloader for NJoy32 platform v1.15

[Victorus]

All controller parameters are adjustable including LEDs. You can easily replace red color to green if you want)). Here https://drive.google.com/open?id=1ojzm-lJM4BlPHnGRqSdAdqRsSr2yOsIo you can find user guide. Section 2.5 describes indication settings. Do not forget to edit zconfig.ini file (saved in the same folder with VKBdevcfg.exe). Add User=Developer string to [User] section to enable those settings.
[User]
===========================
User=Developer
Look here http://forum.vkb-sim.pro/viewtopic.php?f=15&t=2112 for some useful info. For example:
Resolved:
1. BVR/NAV/DVB switch and macro http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2081
2. LEDs http://forum.vkb-sim.pro/viewtopic.php?f=3&t=1846, http://forum.vkb-sim.pro/viewtopic.php?f=28&t=2076

[heloguy]

I have the same issue, just opened a trouble ticket. I thought the lights on the Black Box were to indicate whether or not everything is working properly, not to be customizable.

[Drano]

Don't know how new you are to these sticks but make sure you followed this guide when flashing. Every step is important.

https://vkbcontrollers.com/?faq=how-to- ... ar-15-2018

[heloguy]

I'm familiar with the process, and have tried it a couple of times, with the newest firmware, and with the previous one (currently with the newest firmware). I've also tried taking the grip/extension/base apart, and re-seating everything in between flashes to make sure that isn't the problem. The weird thing is, everything works fine. Just the red bus and stick lights.

[Easty79]

I just spent THREE F-ing hours looking up this same thing....

So the RED steady light is ok... WTF..... Red means problem, green means good to go, why the hell did you change this in the firmware update?

This makes no sense and just wasted a whole heaps of my time (the user manual you keep posting has NOTHING on the black box lights, just 114 pages of in depth tech info that is not needed).

VKB, this is shocking.

[Ron61]

Come on, start reading on page 30 of this document. Can you be more specific about the problem? What is the task and what did you try to do?

[Victorus]

Black Box lights settings are the same as for Mamba controller, SCG grips and so on. Also. Red light is not alarm forever)))
Please show screenshots of your LEDs tab of vkbdevcfg.exe.