Calibration after flashing v1.91F
Moderator: AdminGroup
Re: Calibration after flashing v1.91F
exactly what I've been trying. At first the lights are not on, after some time (< 10 minutes) they come on as I showed in my first screenshoot (along the bottom).
-
- Posts: 313
- Joined: Sun Oct 01, 2017 5:00
- Location: Representin' the 302
- Has thanked: 20 times
- Been thanked: 86 times
Re: Calibration after flashing v1.91F
just checked mine. Still normal. I don't know why yours would come back after a period of time.
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01
Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01
Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64
-
- Posts: 313
- Joined: Sun Oct 01, 2017 5:00
- Location: Representin' the 302
- Has thanked: 20 times
- Been thanked: 86 times
Re: Calibration after flashing v1.91F
Only thing that came to mind was calibration timing out. On the global tab under common/basic. Look under the check boxes and there's a box that says AClTime. Set that to always and see if that doesn't clear it up. (that's what I have mine set to)
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01
Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01
Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64
-
- Posts: 313
- Joined: Sun Oct 01, 2017 5:00
- Location: Representin' the 302
- Has thanked: 20 times
- Been thanked: 86 times
Re: Calibration after flashing v1.91F
AG I was just verifying that what rwalker was seeing I was also seeing. I only recall this happening the last couple of FW flashes but I'm still learning the software. Posted the pics of my flashing steps in case it's not normal and a possible bug.
Otherwise my stick has been fine.
Otherwise my stick has been fine.
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01
Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01
Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64
Re: Calibration after flashing v1.91F
While I haven't specifically timed how long it takes for the buttons to come on, it just "seemed" like about 10 minutes. I see in my settings AclTime is set to 10 minutes. Maybe that isn't a coincidence. I'll try setting it to always and see what happens. AG, I have moved on to 921 yesterday, so, yes, I still see this issue with 921.
Re: Calibration after flashing v1.91F
ok, so I got home tonight, my computer was turned off. I turned it on, ran Device Config, no buttons lit. This time I decided to time how long the lights would take to come on, one minute later, this:
I'm going to change AclTime to always and reflash.....
I'm going to change AclTime to always and reflash.....
Re: Calibration after flashing v1.91F
The lights came back on I did think it was working after setting ACITime to always, the buttons seemed to stay ok for a much longer time. I'm going back to version 1.91E as it seemed to work perfectly for me. Is there any information anywhere that lists what is fixed in each firmware update?
Re: Calibration after flashing v1.91F
I have the same issue. As a temporary workaround I reconnect joystick.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
-
- Posts: 1164
- Joined: Mon May 12, 2008 9:10
- Location: Минск
- Has thanked: 12 times
- Been thanked: 125 times
Re: Calibration after flashing v1.91F
Let's try latest version
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
Re: Calibration after flashing v1.91F
I flashed 1.929, it has been about 30 minutes, I tried a quick dogfight in DCS and mapped the brake button. So far so good but a little more time will tell....
*Update* Still working....
*Update* Still working....
Last edited by rwalker on Sun Jan 21, 2018 3:08, edited 1 time in total.
-
- Posts: 313
- Joined: Sun Oct 01, 2017 5:00
- Location: Representin' the 302
- Has thanked: 20 times
- Been thanked: 86 times
Re: Calibration after flashing v1.91F
Not seeing the multiple buttons pressed issue at any of the flashing steps so far in v1.929. Took a couple of hops. Will leave the test screen up for a bit and see what happens.
Update: Had left VKBDevconfig up overnight. Button press issue didn't return. (in my case it never had but tested it anyway)
Update: Had left VKBDevconfig up overnight. Button press issue didn't return. (in my case it never had but tested it anyway)
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01
Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01
Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64
-
- Posts: 10
- Joined: Sun Nov 19, 2017 19:18
- Been thanked: 1 time
Re: Calibration after flashing v1.91F
I have this exact same issue with the latest 1.921. I'll try the FW version posted in this thread to see if it fixes it.
Who is online
Users browsing this forum: No registered users and 44 guests