How to install Warthog Adapter on Mamba
Moderator: AdminGroup
-
- Posts: 39
- Joined: Tue Dec 01, 2015 4:40
- Has thanked: 7 times
- Been thanked: 3 times
Re: Instructions on how to install Warthog Adapter
OH nice thank you for the post i was wondering what to do scratching my head lol. didnt even get to setup my joystick that arrived lastnight.
Re: Instructions on how to install Warthog Adapter
AWESOME, thanks! Will get the warthog .cfg on tonight and get testing
Re: How to install Warthog Adapter on Mamba
Nice write up Jason.
I was able to accomplish the Warthog grip gimbal mount installation before I saw this, but the how-to to upload the Warthog profile was not something I had figured out. Worked like a charm!
One question I did have regarding the warthog grip adapter kit - I noticed an additional cam marked "W" Is that supposed to go onto the Y axis cam to assist countering the weight of the warthog since it leans a bit forward?
Additionally after updating the Black Mamba with the warthog profile the gear lights aren't working correctly. Top red is only lit up when switch is in the up position, top green and right green only when switch is in the lower position. It doesn't impede any functions just wanted to report.
I was able to accomplish the Warthog grip gimbal mount installation before I saw this, but the how-to to upload the Warthog profile was not something I had figured out. Worked like a charm!
One question I did have regarding the warthog grip adapter kit - I noticed an additional cam marked "W" Is that supposed to go onto the Y axis cam to assist countering the weight of the warthog since it leans a bit forward?
Additionally after updating the Black Mamba with the warthog profile the gear lights aren't working correctly. Top red is only lit up when switch is in the up position, top green and right green only when switch is in the lower position. It doesn't impede any functions just wanted to report.
Re: How to install Warthog Adapter on Mamba
Stratojet-Jason wrote:Satyrn,
I'm not sure about the lights to be honest. I'll have to ask UIV about it.
As it happens this evening I reset the FBM back to default then reloaded the Warthog profile. The gear lights are now working without issue.
Re: How to install Warthog Adapter on Mamba
Followed the instructions and loaded the warthog profile; however, no programs seem to recognize any button presses on the stick, and the "Buttons wizard" in the configurator is grayed out. Any help would be greatly appreciated.
EDIT: Nevermind... took the stick apart and found that somehow one of the wires on the adapter had been clipped in the process of installation despite my best efforts. Anyone got any idea what gauge wire that uses so I can try and patch it up?
EDIT: Nevermind... took the stick apart and found that somehow one of the wires on the adapter had been clipped in the process of installation despite my best efforts. Anyone got any idea what gauge wire that uses so I can try and patch it up?
Re: How to install Warthog Adapter on Mamba
Marut wrote:Followed the instructions and loaded the warthog profile; however, no programs seem to recognize any button presses on the stick, and the "Buttons wizard" in the configurator is grayed out. Any help would be greatly appreciated.
EDIT: Nevermind... took the stick apart and found that somehow one of the wires on the adapter had been clipped in the process of installation despite my best efforts. Anyone got any idea what gauge wire that uses so I can try and patch it up?
Please, upload photos of damage
Re: How to install Warthog Adapter on Mamba
Pictures attached; clearly I must have slipped up when putting the warthog handle back together (I was careful to push the wires out of the way, but it did get jostled around some before the screws went back in), and the two halves clipped that green wire right in two. I can built computers, rifles, and networks from the ground up, but I try upgrading a joystick and I epic fail
Re: How to install Warthog Adapter on Mamba
There are two solutions for solving this problem:
1) visit repair shop and ask repair broken wires, it's easy to repair.
2) we can help you and change your broken wire to new one, but need time for delivery from China to USA.
1) visit repair shop and ask repair broken wires, it's easy to repair.
2) we can help you and change your broken wire to new one, but need time for delivery from China to USA.
Re: How to install Warthog Adapter on Mamba
Any help would be greatly appreciated. I've been looking for an electronics repair shop in the area, but they seem to be extinct where I am - don't even have Radio Shack anymore. I'll keep looking, but if there's a replacement piece I can buy I'd gladly do that regardless of whatever wait time is needed. Thank you so much for the response!
-
- Posts: 39
- Joined: Tue Dec 01, 2015 4:40
- Has thanked: 7 times
- Been thanked: 3 times
Return to “Manuals and Howtos”
Who is online
Users browsing this forum: No registered users and 10 guests