VKB Rudders MkIV issues

[JBar]

I still don't see the MaRS option even after enabling developer mode: https://imgur.com/Ww7C5G4
Also should I be doing anything to register the black box?

[JBar]

I also pulled mine apart and here's the inside:
https://imgur.com/8J88NGC
https://imgur.com/CpGgxQ8

[Ron61]

Add a line.

[JBar]

Ok the Misc is working now. I clicked the green button and this is what shows up:

[Ron61]

Excellent, from the sensor on the 7th axis 0% errors. It remains only to calibrate this axis and show a screenshot of the Profile-Axes tab.

[Victorus]

what is the connector type for that lead?

[JBar]

Excellent, from the sensor on the 7th axis 0% errors. It remains only to calibrate this axis and show a screenshot of the Profile-Axes tab.

OMG!!!! This time when I went to calibrate the jittering finally stopped! The game is working fine now! I wonder what fixed it? I unplugged and replugged in all the wires I wonder if that helped. Now I don't have to return them

[fallout9]

Nice! Sorry for the extra work though.

Waiting on Cookie now...

[cookie70]

Pulled mine apart again and did continuity test on the cable, all appears ok. I plugged the cable in a few times and tested, still the same, no matter what I do the jitter remains and the sensor doesnt appear to smoothly move through the range as I rotate the magnet as you would expect.

[fallout9]

Just to make sure everything is good on this side - you did press the Default button, right?
Is there a router, wifi extender or any other source of ER around the rudders?

[cookie70]

Yes, press default, it reboots then calibrate.

I have a access point up on the roof so its not what I would consider "close" to the pedals. Never had EMF issues with anything before and my VKB stick works perfectly.

Well done Jbar for sorting yours out, I'm not so lucky!

[JBar]

Wish I knew what fixed it for me. As you saw I took everything apart and unplugged then replugged in all the wires. In the .ini file I added User=Developer under the user section and Test Misc Enabled=1 under the main "common" lines. After that I did what I've done a million times which was to click default then calibrate and for whatever reason it stopped

[Ron61]

If the problem is not eliminated, then the screenshots from the configurator and JoyTester are better than any words.

[cookie70]

This is what it is still doing after numerous attempts to get it running.

https://imgur.com/a/N7Te5nr

[Ron61]

Check the presence of errors in the test-MISC when turned on with a green triangle and while pressing the pedals. Very similar to damage (non -contact) of the connecting train in the pedals themselves.