Having problems getting the Buttons on a THQ WW2 Grip to be recognized

[Horstan_Andamir]

Hey Guys,
I am running into problems with my current setup wich looks as follows. I use a Gladiator EVO NXT SCG with the z-twist. From the base of my gladiator I have connected two NXT Modules via the GNX BUS (Type-C)-(JST2.0-4). The cable runs into a GNX THQ-V to wich the GNX SEM-V is connected internally. All Buttons and Axies on both GNX Modules and the SCG are correctly recognized. My problem is with the recognition of the WW2 Throttle adapter, that is additionally connected to the GNX THQ-V. No Button input is recognized here and the GNX THQ-V defaults to being set to Sub-1. If I manually set it to Sub-4, the entire GNX THQ-V isnt recognized for any input anymore.

I also checked for any running software from razer, corsair, etc. in the background but this dosnt seem to be the problem.

Hope somebody can help me.

Cheers

[fallout9]

Make sure that the THQ is on subaddress 4, otherwise it can't read the grip. Here's the guide.