GUNFIGHTER PLUS T RUDDERS MK IV VIRTUAL BRAKES

[JOSGEM]

hello,
Is there any guide to be able to configure the virtual brakes on the flight rudder MK IV for DCS
I have the VKB gunfighter and the MK IV all connected in the orange black box.I am trying to do it
but without success. thanks

[fallout9]

Check this: viewtopic.php?f=27&t=3570&p=35008&hilit=toe+brakes#p35008
and this: viewtopic.php?f=25&t=4095&p=39015&hilit=toe+brakes#p39015

[JOSGEM]

Sorry but the english is not my native idiom and i don´t understand anything what they are doing in the links.i have tried again but
unsuccessfully
I would like to use the lower brake lever to activate the rudder differential brakes
i wish they where a guide for things like this that a person that don´t know too much about this program could utilize.
it is very frustating that in the manuals we can´t find a more clear guide.

I think it would be beneficial for all of us if we had a clearer guide to the use of the program with practical examples of the most probable situations such as the one I describe,and please do not understand it as a criticism but as an improvement
Sorry by my poor english

[Victorus]

Does your brake lever work?

[JOSGEM]

Hello, yes it works, I have been testing for two hours and I am not getting the brake lever to activate the virtual brakes of the flight rudder.
I have tried DCS and IL2 but there is no way I am very clumsy for this kind of thing.
the pedals work perfectly but I am not able to get that pressing the brake lever activates the brakes of one or the other wheel.
again sorry by my poor english

[Ron61]

In this profile, everything is done, as in the previous links. Load this profile with the Load button in the configurator and click Set. After that, calibrate all the axes, not forgetting the axis of the trigger. If something does not work, show a screenshot.

1.996 MCG+virtual brake T-Rudder.rar

(1.1 KiB) Downloaded 258 times

[JOSGEM]

Hello, I still can't get it to work, and before that I had both sticks configured as if they were 4 buttons plus the one to press, that is, 5 buttons in total.
now the button marked in red does not work and unfortunately neither do the virtual brakes when I press the brake lever.
I send you a screenshot. Thank you very much in advance

[/attachment]

[JOSGEM]

[Ron61]

In my profile, the central button of the top stick works as the 32nd logical, the central button of the left stick as the 8th short press and the axis switch / HAT uSSw switch. But in your POVs settings it stands, like Always. That will not allow to switch axes / HAT. Either load the profile as is, in its entirety, or attach your own for debugging. The brakes work.

[JOSGEM]

Thank you very much, I will try again tonight. I am very grateful for the time spent