Gladiator Pro Warthog Adapter
Moderator: AdminGroup
Re: Gladiator Pro Warthog Adapter
After I calibrated It went back to Virtual and no buttons work. Stick axis and throttle work but still no rudders.
Re: Gladiator Pro Warthog Adapter
I loaded the Warthog profile back and buttons work again but still no rudders. I would like to get the pedals to work with the stick but I can always use them with the Tiny Box hooked straight to USB port. Its great to have the joystick buttons working and I have been playing around with the Cams and Springs. Its fun to be able to use the Warthog Handle again since I put it away after giving up on the Stickton issues I was having with it. 'The Gladiator Base and Warthog handle is great' If you got any other ideas for me to try please let me know. I would like to learn what all the stuff is in the DeviceConfig program but does seem very complicated.
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Gladiator Pro Warthog Adapter
So it is now connected to the handle Warthog and loaded his profile? Need screenshots of Global, Profile. I would like to find out until the end and make it work as it should. Believe me, there's nothing complicated here.
Re: Gladiator Pro Warthog Adapter
Yes I have the Warthog Handle on and loaded the Warthog Profile. Here are the screenshots. I have only had the Warthog handle on with all the testing, but should I put the Gladiator Handle on for testing? didn't know if it would make a difference in getting the rudder pedals to work.
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Gladiator Pro Warthog Adapter
1. Use v.78.99 configurator and add to [User] User = Developer in Zconfig.ini
2. Change the screenshot and click Set.
3. After restarting the configurator to check the changes and show a screenshot.
4. Calibrate all axis and show a screenshot.
2. Change the screenshot and click Set.
3. After restarting the configurator to check the changes and show a screenshot.
4. Calibrate all axis and show a screenshot.
Re: Gladiator Pro Warthog Adapter
Hi,
I want to install my Warthog adapter to the Gladiator Pro and I have a question:
The WH adapter is shipped with a single "W" cam. The Gladiator base has 2 cams.
1. How to identify the cam that needs to be replaced with the "W" cam?
2. I suppose the other cam (10) can stay in place. Please confirm!
Thanks,
Hans-Werner
I want to install my Warthog adapter to the Gladiator Pro and I have a question:
The WH adapter is shipped with a single "W" cam. The Gladiator base has 2 cams.
1. How to identify the cam that needs to be replaced with the "W" cam?
2. I suppose the other cam (10) can stay in place. Please confirm!
Thanks,
Hans-Werner
Re: Gladiator Pro Warthog Adapter
I have been trying to get it to run with no luck. I keep getting device cannot be opened with the 78.99
Re: Gladiator Pro Warthog Adapter
The different Config 77 versions will run but none of the 78 versions will not run.
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Gladiator Pro Warthog Adapter
It is a pity that you do not know the Russian language, I would have told you ... . Try to repeat both the video could not be easier.
https://yadi.sk/i/m_5T-4Db39fhnv
https://yadi.sk/i/m_5T-4Db39fhnv
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: Gladiator Pro Warthog Adapter
LeCuvier wrote:Hi,
I want to install my Warthog adapter to the Gladiator Pro and I have a question:
The WH adapter is shipped with a single "W" cam. The Gladiator base has 2 cams.
1. How to identify the cam that needs to be replaced with the "W" cam?
2. I suppose the other cam (10) can stay in place. Please confirm!
Thanks,
Hans-Werner
The "W" cam is for the pitch axis. The roll axis can stay in place.
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
Re: Gladiator Pro Warthog Adapter
Can someone post screenshots of 'A WORKING GLADIATOR W/RUDDERS HOOKED UP TO IT' I would like to see Profile, Global and Test screenshots so I can see what I am trying to get. If you can post a screenshot of the axis test please identify what the rudders are.
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: Gladiator Pro Warthog Adapter
@louviljlj: and you are sure that you didn't accidentally pin, squeeze or break a cable inside the TM Warthog grip? Also, you seated the TM Warthog grip correctly onto the Glad Pro base with correct electrical contact made between the grip and the base? Sorry, trying to eliminate all possibilities here.
BTW - Thanks Ron61 for providing such awesome support here!
BTW - Thanks Ron61 for providing such awesome support here!
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
Who is online
Users browsing this forum: No registered users and 90 guests