Use the throttle lever of my STECS with detent for reverse. (Star Citizen)

[Pengo]

Hello everyone, I wanted to use the last part of the throttle lever to activate the reverse.
I have configured the detent and assigned button as shown in the pictures but the problem is that Star Citizen in the reverse setting recognizes the axis of the gas lever instead of the button so it does not work.




This is how I would like it to work:


Error: In the image it is not button 56, it is 65 or 66.

Can you think of a solution?
Thank you very much for your help.

[jukelo]

Set the 'Crv%' value for your detent to zero. This will make it so your throttle axis reports a value of zero when the physical lever is positioned between the bottom of the range and the upper edge of the virtual detent.
Then before binding your reverse button in SC, move the throttle into the detent area, where it reports zero and will not be detected by the game. Then select your game action to bind, and move the throttle back past the detent and into the zone where the button is triggered for the game to detect.

[Pengo]

Hi, thanks for your reply.

I'm trying your tip and it seems to work, although I had a hard time binding it. (Blame SC horrible binding interface)

Your help came just in time for 4.0.2, so thank you!