The other day I was cleaning up my rudder pedal set and out of curiosity opened up the box that contains its board and to my surprise I noticed there's two sockets labeled as axes connectors on it.
They seem to be traced properly but are those actually polled? If so what could one connect there to use these extra axes?
T.Rudder MkIV, axes connectors on board
Moderator: AdminGroup
-
- Posts: 17
- Joined: Mon Jul 13, 2020 20:09
- Has thanked: 4 times
- Been thanked: 2 times
-
- Posts: 24
- Joined: Tue Sep 07, 2021 20:17
- Has thanked: 2 times
- Been thanked: 1 time
Re: T.Rudder MkIV, axes connectors on board
I tried adding some hall sensors and pots there but got nothing to work in the config software. I think those axis ports require the D-Mars sensors to work.
Re: T.Rudder MkIV, axes connectors on board
Please show your board image. What color is your BlackBox? Orange version has axes sockets that work. With VKB sensors only.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
-
- Posts: 17
- Joined: Mon Jul 13, 2020 20:09
- Has thanked: 4 times
- Been thanked: 2 times
Re: T.Rudder MkIV, axes connectors on board
Yup that's the board I mean, not the blackbox. Thanks for the reply!
I assume the D-Mars is a proprietary sensor? Because the only thing I seem to find online is a bunch of Israelis LARPing as Mars colonists.
I assume the D-Mars is a proprietary sensor? Because the only thing I seem to find online is a bunch of Israelis LARPing as Mars colonists.
Who is online
Users browsing this forum: No registered users and 108 guests