VKB TECS: MODULARITY FULL AHEAD

Moderator: AdminGroup

OiseanTech
Posts: 4
Joined: Wed Jan 27, 2021 22:33
Has thanked: 2 times

Re: VKB TECS: MODULARITY FULL AHEAD

Postby OiseanTech » Wed Feb 24, 2021 22:39

As a fellow SC Player I'm not sure it'd detect it. I use a similar control for ground vehicles and right now it's 50/50 forward/back. If it reads the detent as the 'halfway' then it MIGHT work. I tend to have AB set to a button and separate axis bound to the Relative o I can increase the top on the fly.

EnderR2
Posts: 16
Joined: Mon Feb 01, 2021 3:05
Has thanked: 8 times
Been thanked: 5 times

Re: VKB TECS: MODULARITY FULL AHEAD

Postby EnderR2 » Thu Feb 25, 2021 3:25

Welcome back from CNY. I hope everyone had an enjoyable holiday! Any news on this project? Anxiously waiting for a throttle!

nickyeager
Posts: 1
Joined: Sat Feb 20, 2021 0:26
Been thanked: 1 time

Re: VKB TECS: MODULARITY FULL AHEAD

Postby nickyeager » Thu Feb 25, 2021 9:21

:D Same here, I check this forum literally every day just hoping...

james340
Posts: 30
Joined: Mon Dec 07, 2020 17:06
Has thanked: 26 times
Been thanked: 9 times

Re: VKB TECS: MODULARITY FULL AHEAD

Postby james340 » Thu Feb 25, 2021 19:20

From my understanding, it won't be released 'by the end of the lunar year', so we likely won't see it until Feb 2022.

Which I'm fine with - it looks amazing, we have more details on it, and they're clearly working hard during difficult times to bring this product to us.

Still, don't quote me on this, I might have misread or misinterpreted the wording. If its released earlier, I'll be thrilled!

EnderR2
Posts: 16
Joined: Mon Feb 01, 2021 3:05
Has thanked: 8 times
Been thanked: 5 times

Re: VKB TECS: MODULARITY FULL AHEAD

Postby EnderR2 » Thu Feb 25, 2021 22:47

When that was written, it was near the end of the 2020 Lunar year, which led me (and I think others) to assume it was speaking of Feb 2021, and that release was basically imminent. Due to the update on the main page regarding shipping delays, and requesting 10 days to catch up with back orders; I think the soonest we can reasonably hope to hear something, would be in the first half of March. However, that is merely interpretation, and conjecture. I know just as little as everyone else. I will say I can wait a month or so, but not 12. VKB will be missing opportunities provided by Elite Dangerous new expansion, and I would be surprised if Star Citizen, MS Flight 2020, SW Squadrons, or any of the new AAA titles coming out to help drive sales.

Also, lets be completely transparent and frank. Right now, Logitech x56, X52, and Thrustmaster anything are commanding insane prices in the US. Releasing a $200 basic throttle, along with a $400 advanced throttle into the market right now WILL SELL and help to expand market share. That's an opportunity that may not last into next year. So, here I sit, impatiently awaiting the opportunity to spend a dozen hours worth of overtime!

spacenavy90
Posts: 3
Joined: Sat Feb 13, 2021 0:56
Been thanked: 1 time

Re: VKB TECS: MODULARITY FULL AHEAD

Postby spacenavy90 » Thu Feb 25, 2021 23:49

james340 wrote:From my understanding, it won't be released 'by the end of the lunar year', so we likely won't see it until Feb 2022.

Which I'm fine with - it looks amazing, we have more details on it, and they're clearly working hard during difficult times to bring this product to us.

Still, don't quote me on this, I might have misread or misinterpreted the wording. If its released earlier, I'll be thrilled!


This was written before the start of the new lunar year on Feb 12th. The message implies that they would not release before then and obviously haven't yet.

As mentioned in the original post, they've already enter production and it doesn't take a full year for that to come to consumers. I suspect we'll see more information and possibly even an initial release (maybe the non-detent version) in the next couple months or so.

Bas
Posts: 31
Joined: Mon Feb 22, 2021 16:11
Been thanked: 1 time

Re: VKB TECS: MODULARITY FULL AHEAD

Postby Bas » Fri Feb 26, 2021 14:07

Hoping for a release within the next month or so, I'm currently in the process of replacing my twcs but I'm not looking forward to waiting another quarter or so for a release. Might just have to go with another pick as I'm not a huge fan of the handlebar guard on the left side that I saw but I'm holding off until a final version is being shown/released for now.

gidimi
Posts: 13
Joined: Wed Sep 02, 2020 13:01
Has thanked: 1 time

Re: VKB TECS: MODULARITY FULL AHEAD

Postby gidimi » Fri Feb 26, 2021 17:40

Good points, completely forgot about GA as well. Here's hoping we do in fact get a right hand throttle

james340
Posts: 30
Joined: Mon Dec 07, 2020 17:06
Has thanked: 26 times
Been thanked: 9 times

Re: VKB TECS: MODULARITY FULL AHEAD

Postby james340 » Mon Mar 01, 2021 16:38

spacenavy90 wrote:
james340 wrote:From my understanding, it won't be released 'by the end of the lunar year', so we likely won't see it until Feb 2022.

Which I'm fine with - it looks amazing, we have more details on it, and they're clearly working hard during difficult times to bring this product to us.

Still, don't quote me on this, I might have misread or misinterpreted the wording. If its released earlier, I'll be thrilled!


This was written before the start of the new lunar year on Feb 12th. The message implies that they would not release before then and obviously haven't yet.

As mentioned in the original post, they've already enter production and it doesn't take a full year for that to come to consumers. I suspect we'll see more information and possibly even an initial release (maybe the non-detent version) in the next couple months or so.


Makes a lot of sense, and I really hope that's the case. Guess we'll find out soon. Finger's crossed my timeline is off the mark ;)

allentc2
Posts: 20
Joined: Wed Jan 27, 2021 5:09
Has thanked: 1 time

Re: VKB TECS: MODULARITY FULL AHEAD

Postby allentc2 » Tue Mar 02, 2021 0:50

Any chance we can get a measurement of the base?

Bas
Posts: 31
Joined: Mon Feb 22, 2021 16:11
Been thanked: 1 time

Re: VKB TECS: MODULARITY FULL AHEAD

Postby Bas » Wed Mar 03, 2021 16:05

Is there any rough estimate of when we can expect a release? I'm more then happy to wait for a month or one and a half for the TECS to release. But I'm currently in the process of upgrading my hardware(Already bought the gladiator NXT) but a throttle is lacking behind a little. I wasn't planning to hold off for another 3-6 months on pulling the trigger on a throttle so to say.

miksmax
Posts: 30
Joined: Mon Feb 01, 2021 19:27
Has thanked: 11 times
Been thanked: 5 times

Re: VKB TECS: MODULARITY FULL AHEAD

Postby miksmax » Wed Mar 03, 2021 16:15

You and me both, Bas 8)

Bas
Posts: 31
Joined: Mon Feb 22, 2021 16:11
Been thanked: 1 time

Re: VKB TECS: MODULARITY FULL AHEAD

Postby Bas » Wed Mar 03, 2021 16:33

haha yeah I'm sure there's a lot of us, I'd ideally like to have the VKB throttle since my stick will be a VKB as well. But seeing that other though a bit more expensive options are available within a month of ordering today.. it's hard to convince myself to not just go for them haha. Let's just hope it comes out soon!

miksmax
Posts: 30
Joined: Mon Feb 01, 2021 19:27
Has thanked: 11 times
Been thanked: 5 times

Re: VKB TECS: MODULARITY FULL AHEAD

Postby miksmax » Wed Mar 03, 2021 21:17

Which other more expensive options were you referring to? 8)

Bas
Posts: 31
Joined: Mon Feb 22, 2021 16:11
Been thanked: 1 time

Re: VKB TECS: MODULARITY FULL AHEAD

Postby Bas » Wed Mar 03, 2021 21:24

I don't think it's fair to state competitor hardware on VKB's own forum, but within the projected price range of this module it's pretty much standing on it's own. But there are of course some options that you'll easily find with a bit of searching around on the web! :wink:


Return to “Official announcements”

Who is online

Users browsing this forum: No registered users and 3 guests