I would like to update my VKB Gunfighter MK II firmaware but I have some question:
Should I use "_NJOY32_v1_98_F.vkb" for my joystick?
Follow report:
PS, it has twist.
Updating VKB Mk II
Moderator: AdminGroup
-
- Posts: 3277
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Updating VKB Mk II
When choosing a firmware, you should focus on the name of the installed grip. And the Black Box version - the letters MK2 in the name - is for black, without them - for orange.
Re: Updating VKB Mk II
Thanks for replay.
So, i believe that the correct one is "[i]_BlackBox_MK2_TRudder_v1_98_F.vkb" as my stick has twist.
Can you confirm?[/i]
Nevermind.
So, i believe that the correct one is "[i]_BlackBox_MK2_TRudder_v1_98_F.vkb" as my stick has twist.
Can you confirm?[/i]
Nevermind.
Last edited by thiagolpv on Wed May 27, 2020 15:01, edited 3 times in total.
Re: Updating VKB Mk II
Look at this:
Now I think that I have last firmaware.
If correct, I do not have action.
Thanks in advance!
Now I think that I have last firmaware.
If correct, I do not have action.
Thanks in advance!
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: Updating VKB Mk II
Hi Thiagolpv,
Looks like you have a Gladiator MKII over there. Also looks like you got the latest VKBDevCfg software version, but your joystick needs a firmware to match that. So do the following:
1. Go to https://vkbcontrollers.com/, click on Donwload section.
2. Download the VKB Device Firmware (v1.98.F), the VKBDevCfg (v0.91.22) and the Bootloader (ZBootloader (v1.18).
3. Put all these 3 files in a separate folder and unzip them.
4. Open VKBDevCfg and navigate to Tools tab, then press on the big square Bootloader button.
5. In the new window press the ... button and navigate to the folder V1.98F and choose the file named _Gladiator_v1_98_F.vkb.
6. Select that file and click OK button. The Bootloader will flash that file and will close.
7. Open again VKBDevCfg and go to Tools tab and press the big square Default button.
8. After joystick restarts go to the Test tab, then Axes section.
9. Press the Start Calibr button and move all the axes on your joystick: pitch, yaw, twist, throttle.
10. When done press End Calibr and from there you're good to go: your joystick is flashed and calibrated properly.
Here's a video that covers this operation, might help you: https://youtu.be/8Ht8yMsdlCQ
Looks like you have a Gladiator MKII over there. Also looks like you got the latest VKBDevCfg software version, but your joystick needs a firmware to match that. So do the following:
1. Go to https://vkbcontrollers.com/, click on Donwload section.
2. Download the VKB Device Firmware (v1.98.F), the VKBDevCfg (v0.91.22) and the Bootloader (ZBootloader (v1.18).
3. Put all these 3 files in a separate folder and unzip them.
4. Open VKBDevCfg and navigate to Tools tab, then press on the big square Bootloader button.
5. In the new window press the ... button and navigate to the folder V1.98F and choose the file named _Gladiator_v1_98_F.vkb.
6. Select that file and click OK button. The Bootloader will flash that file and will close.
7. Open again VKBDevCfg and go to Tools tab and press the big square Default button.
8. After joystick restarts go to the Test tab, then Axes section.
9. Press the Start Calibr button and move all the axes on your joystick: pitch, yaw, twist, throttle.
10. When done press End Calibr and from there you're good to go: your joystick is flashed and calibrated properly.
Here's a video that covers this operation, might help you: https://youtu.be/8Ht8yMsdlCQ
Return to “Manuals and Howtos”
Who is online
Users browsing this forum: No registered users and 68 guests