Is it possible to combine one absolute axis and one relative axis?
Moderator: AdminGroup
Is it possible to combine one absolute axis and one relative axis?
By default settings, logical axis 3 and 4 on mcg pro is configured as relative axes. And I read about using combine axis to "trim" on manual. So I want to use relative axis 3 and 4 to trim Y and X axis respectively. I tried combi and dif mode on axis X/Y with axis 4/3, however it seems to combine physical axis into X/Y, not the logical relative axis. Is it possible to do so?
Re: Is it possible to combine one absolute axis and one relative axis?
sgsdxzy wrote:By default settings, logical axis 3 and 4 on mcg pro is configured as relative axes. And I read about using combine axis to "trim" on manual. So I want to use relative axis 3 and 4 to trim Y and X axis respectively. I tried combi and dif mode on axis X/Y with axis 4/3, however it seems to combine physical axis into X/Y, not the logical relative axis. Is it possible to do so?
Please show screenshots of physical and logical axes tabs.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: Is it possible to combine one absolute axis and one relative axis?
The screenshot of physical and logical axes tabs ia as follows.
Re: Is it possible to combine one absolute axis and one relative axis?
Yes I have already read that. It says on page 33
However I want to use logical axis as trimmer, because they can be configured as relative axis. I don't know if it's possible.
When you combine axes you must have forcing axis, physical or virtual.
However I want to use logical axis as trimmer, because they can be configured as relative axis. I don't know if it's possible.
Sokol1 wrote:Look at "combine axis" in Njoy32 manual, page 32:
Njoy32 Configuration Utility User Guide
Re: Is it possible to combine one absolute axis and one relative axis?
"...forcing axis, physical or virtual" means that forcing axis can be Physical such as D-Mars or Analog or Virtual i.e. button configured as Trimmer+/- or trimmerAuto+/- or encoder configured as trimmer.
In our case axes 3&4 are virtual. They can be combined with "main" axes X&Y but I've found bug(?) Suggested: I (you) press and release HAT. Its response is fixed thus trimming X axis. Really when I release HAT its response stays constant but combined X axis returns to center(((.
That is all for this moment((((
In our case axes 3&4 are virtual. They can be combined with "main" axes X&Y but I've found bug(?) Suggested: I (you) press and release HAT. Its response is fixed thus trimming X axis. Really when I release HAT its response stays constant but combined X axis returns to center(((.
That is all for this moment((((
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: Is it possible to combine one absolute axis and one relative axis?
I have also am trying to setup my Master Mode axes as Trimmer for the X/Y stick axis. I have read pg 33 about how to setup the combi 1 and have set it up just like this also. But it re-centers elevator & ailerons after I let go of the Master Mode axes. So, it does not act as a trimmer because the surfaces do not "stay" trimmed.
This is kind of confusing. What am I doing wrong? Can it be made to "stay" trimmed after the hat is released?
This is kind of confusing. What am I doing wrong? Can it be made to "stay" trimmed after the hat is released?
sgsdxzy wrote:The screenshot of physical and logical axes tabs ia as follows.
Re: Is it possible to combine one absolute axis and one relative axis?
3.5.2. Combi modes
Problem definition: how to trim axis #1 (roll) using axis #8?
To resolve this problem do the following actions.
1. Open Profile — CommonnAxes — Logical Axis tab.
2. Choose Combi1 item from Combine combo box for axis #1.
3. Enter number of forcing axis, 8 in this example, using #Axis counter.
4. Set maximum combining effect using % counter. This value determines trimmed axis center shift if forcing axis will be moved to its extreme position. 50% moves center to range limit. It is recommended to use 20-25%.
5. Set center shift direction choosing item + or - from Sign combobox (Fig. 3.3).
6. Press Set button to save settings to controller memory.
7. Check axes combining using VKBJoytester.
Fig. 3.4 shows axes #8 (pink) and #1 (black) response if axis #8 is rotated. Physically axis#1 is idle.
The way that I understand 'center shift' is to move the center position of the trimmed axis (x/y)??? But it seems the center is not moved. Only the axis current value is modified(moved) as long as the hat is held down. Then returns to it's center.
Re: Is it possible to combine one absolute axis and one relative axis?
Does anybody know if I am just understanding this 'center shift' thing incorrectly? Or if this is just bugged(not working) at the current time?
-
- Posts: 3288
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 45 times
- Been thanked: 639 times
Re: Is it possible to combine one absolute axis and one relative axis?
We tried and know about it.With any other axis (for example, an additional resistor connected to the controller) this works well.
But not with the microstick axis translated into relative mode. Alex Oz promised to deal with this, but only after November 10th. You need to wait.
But not with the microstick axis translated into relative mode. Alex Oz promised to deal with this, but only after November 10th. You need to wait.
Re: Is it possible to combine one absolute axis and one relative axis?
Thanks for the reply! And that is fine. Your and Alex's response have been very timely to my pleasant surprise!
How will I know when this is fixed? Will you post back here? Or do I need to check the software/firmware downloads on Alex's dropbox every week, and just test any new ones that I find?
How will I know when this is fixed? Will you post back here? Or do I need to check the software/firmware downloads on Alex's dropbox every week, and just test any new ones that I find?
Re: Is it possible to combine one absolute axis and one relative axis?
As a workaround - HAT->buttons (two pairs), pair of buttons->Trimmer+&Trimmer- for pitch, another pair for roll. It works.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: Is it possible to combine one absolute axis and one relative axis?
Yes, I have been doing that since I bought my stick.
I am looking forward to this trimmer thing working within the stick and the Master Mode Axis because it will then let me use those 4 buttons on the Hat for other commands.
I am looking forward to this trimmer thing working within the stick and the Master Mode Axis because it will then let me use those 4 buttons on the Hat for other commands.
Who is online
Users browsing this forum: No registered users and 62 guests