1 - Device model and version: Gladiator Pro MKII + MCG Pro (Alpha version)
2 - Controller Firmware version: _Gladiator_VKB_v1_85_B
The mode Red light is blinking and WIZZMO can't read any button or axis on the stick but X ans Y and the base
Gladiator Pro MKII + MCG Pro Firmware
Moderator: AdminGroup
Re: Gladiator Pro MKII + MCG Pro Firmware
JohnSMir wrote:1 - Device model and version: Gladiator Pro MKII + MCG Pro (Alpha version)
2 - Controller Firmware version: _Gladiator_VKB_v1_85_B
Nice beginning but dropped half way.
Please re-read this post: http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762 - I believe you had read it already, but please refresh.
And edit your post with all required information in full.
Best Regards,
AeroGator
AeroGator
Re: Gladiator Pro MKII + MCG Pro Firmware
Please show screenshots of External devices tab. for all connected devices. Their subtabs.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Re: Gladiator Pro MKII + MCG Pro Firmware
I'm not sure what Film maker and lighting have anything to do with Joystick controller, but your link is: Light it up! Basic Filmmaking 3-Point Lighting and Backgrounds - The Basic Filmmaker Ep 93
Any my problem is pretty clear I'm hoping you not missing my point
The mode Red light is blinking and WIZZMO can't read any button or axis on the stick but X ans Y and the base
That mean all the button on the Gladiator Base is working, the X and Y axis is working but none of the button nor axis on the MCG Pro stick is working.
The firmware I'm using is _Gladiator_VKB_v1_85_B
The External device only show the KG-12 stick, If I install it the Bar go to full-green, install MCG Pro the Bar go bottom-red
Now due to work I can't have them with me for quite a while so I can't give you any Screen shot or any more test.
I believe what I need is the Firmware for this, but I can't find the correct one
https://vkbcontrollers.com/?product=vkb ... -w-mcg-pro
Any my problem is pretty clear I'm hoping you not missing my point
The mode Red light is blinking and WIZZMO can't read any button or axis on the stick but X ans Y and the base
That mean all the button on the Gladiator Base is working, the X and Y axis is working but none of the button nor axis on the MCG Pro stick is working.
The firmware I'm using is _Gladiator_VKB_v1_85_B
The External device only show the KG-12 stick, If I install it the Bar go to full-green, install MCG Pro the Bar go bottom-red
Now due to work I can't have them with me for quite a while so I can't give you any Screen shot or any more test.
I believe what I need is the Firmware for this, but I can't find the correct one
https://vkbcontrollers.com/?product=vkb ... -w-mcg-pro
Re: Gladiator Pro MKII + MCG Pro Firmware
JohnSMir wrote:I'm not sure what Film maker and lighting have anything to do with Joystick controller
Damn.
I copied a wrong link, and didn't check it before posting.
A shot too many.
I meant this of course http://forum.vkb-sim.pro/viewtopic.php?f=25&t=2762.
So please have a look at it, and write about your problem according to the guidelines.
Also, as Victorus mentioned, we need screenshots - but anyway, you will read about it in the post I referred you to.
Sorry for the mess and for so many smilies.
Best Regards,
AeroGator
AeroGator
Who is online
Users browsing this forum: Google [Bot] and 101 guests