Calibration after flashing v1.91F

Moderator: AdminGroup

rwalker
Posts: 28
Joined: Thu Jan 04, 2018 19:47
Been thanked: 1 time

Re: Calibration after flashing v1.91F

Postby rwalker » Fri Jan 19, 2018 5:11

exactly what I've been trying. At first the lights are not on, after some time (< 10 minutes) they come on as I showed in my first screenshoot (along the bottom).

Drano
Posts: 313
Joined: Sun Oct 01, 2017 5:00
Location: Representin' the 302
Has thanked: 20 times
Been thanked: 86 times

Re: Calibration after flashing v1.91F

Postby Drano » Fri Jan 19, 2018 5:52

just checked mine. Still normal. I don't know why yours would come back after a period of time.
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01

Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64

Drano
Posts: 313
Joined: Sun Oct 01, 2017 5:00
Location: Representin' the 302
Has thanked: 20 times
Been thanked: 86 times

Re: Calibration after flashing v1.91F

Postby Drano » Fri Jan 19, 2018 5:57

Only thing that came to mind was calibration timing out. On the global tab under common/basic. Look under the check boxes and there's a box that says AClTime. Set that to always and see if that doesn't clear it up. (that's what I have mine set to)
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01

Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64

User avatar
AeroGator
Posts: 827
Joined: Wed May 31, 2017 7:40
Has thanked: 378 times
Been thanked: 479 times

Re: Calibration after flashing v1.91F

Postby AeroGator » Fri Jan 19, 2018 17:21

Any problems with the newest version (921)?
Best Regards,
AeroGator

Drano
Posts: 313
Joined: Sun Oct 01, 2017 5:00
Location: Representin' the 302
Has thanked: 20 times
Been thanked: 86 times

Re: Calibration after flashing v1.91F

Postby Drano » Fri Jan 19, 2018 18:05

AG I was just verifying that what rwalker was seeing I was also seeing. I only recall this happening the last couple of FW flashes but I'm still learning the software. Posted the pics of my flashing steps in case it's not normal and a possible bug.

Otherwise my stick has been fine.
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01

Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64

rwalker
Posts: 28
Joined: Thu Jan 04, 2018 19:47
Been thanked: 1 time

Re: Calibration after flashing v1.91F

Postby rwalker » Fri Jan 19, 2018 18:54

While I haven't specifically timed how long it takes for the buttons to come on, it just "seemed" like about 10 minutes. I see in my settings AclTime is set to 10 minutes. Maybe that isn't a coincidence. I'll try setting it to always and see what happens. AG, I have moved on to 921 yesterday, so, yes, I still see this issue with 921.

rwalker
Posts: 28
Joined: Thu Jan 04, 2018 19:47
Been thanked: 1 time

Re: Calibration after flashing v1.91F

Postby rwalker » Sat Jan 20, 2018 2:22

ok, so I got home tonight, my computer was turned off. I turned it on, ran Device Config, no buttons lit. This time I decided to time how long the lights would take to come on, one minute later, this:
Capture 4.PNG


I'm going to change AclTime to always and reflash.....

rwalker
Posts: 28
Joined: Thu Jan 04, 2018 19:47
Been thanked: 1 time

Re: Calibration after flashing v1.91F

Postby rwalker » Sat Jan 20, 2018 3:45

The lights came back on :( I did think it was working after setting ACITime to always, the buttons seemed to stay ok for a much longer time. I'm going back to version 1.91E as it seemed to work perfectly for me. Is there any information anywhere that lists what is fixed in each firmware update?

User avatar
Victorus
Posts: 1675
Joined: Wed Sep 21, 2011 13:25
Has thanked: 374 times
Been thanked: 257 times

Re: Calibration after flashing v1.91F

Postby Victorus » Sat Jan 20, 2018 11:38

I have the same issue. As a temporary workaround I reconnect joystick.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ

Alex Oz
Posts: 1163
Joined: Mon May 12, 2008 9:10
Location: Минск
Has thanked: 12 times
Been thanked: 125 times

Re: Calibration after flashing v1.91F

Postby Alex Oz » Sun Jan 21, 2018 0:54

Let's try latest version

_BlackBox_GF_MCG_v1_92_9.zip
(125.62 KiB) Downloaded 274 times

_BlackBox_GF_MCG_v1_92_8.zip
(125.62 KiB) Downloaded 231 times
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Calibration after flashing v1.91F

Postby Ron61 » Sun Jan 21, 2018 1:21

Victorus wrote:I have the same issue. As a temporary workaround I reconnect joystick.


Or use the Restart button in the Action tab.

rwalker
Posts: 28
Joined: Thu Jan 04, 2018 19:47
Been thanked: 1 time

Re: Calibration after flashing v1.91F

Postby rwalker » Sun Jan 21, 2018 2:01

I flashed 1.929, it has been about 30 minutes, I tried a quick dogfight in DCS and mapped the brake button. So far so good but a little more time will tell....

*Update* Still working....
Last edited by rwalker on Sun Jan 21, 2018 3:08, edited 1 time in total.

Drano
Posts: 313
Joined: Sun Oct 01, 2017 5:00
Location: Representin' the 302
Has thanked: 20 times
Been thanked: 86 times

Re: Calibration after flashing v1.91F

Postby Drano » Sun Jan 21, 2018 3:07

Not seeing the multiple buttons pressed issue at any of the flashing steps so far in v1.929. Took a couple of hops. Will leave the test screen up for a bit and see what happens.

Update: Had left VKBDevconfig up overnight. Button press issue didn't return. (in my case it never had but tested it anyway)
Gunfighter MkI w/MkIII update + MCG-Pro Grip
Avia S Cams
2x #30A Springs
FW:v2.13F
Devconfig: v92.78
Zbootloader: v2.01

Asus Strix X570-E Gaming
Ryzen9 5800X3D
Asus Strix 3080 12GB
32GB Corsair Vengeance PC3600
EVGA G6 1000W
Reverb G2V2
Win10/64

User avatar
snuffles
Posts: 30
Joined: Sun Apr 02, 2017 8:14
Has thanked: 32 times
Been thanked: 4 times

Re: Calibration after flashing v1.91F

Postby snuffles » Mon Jan 22, 2018 7:03

Alex Oz wrote:Let's try latest version


Saviour! This will definitely need to make it to the News feed on the website.

PabstBleuRibbon
Posts: 10
Joined: Sun Nov 19, 2017 19:18
Been thanked: 1 time

Re: Calibration after flashing v1.91F

Postby PabstBleuRibbon » Tue Jan 23, 2018 22:08

I have this exact same issue with the latest 1.921. I'll try the FW version posted in this thread to see if it fixes it.


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 29 guests