Gunfighter. Led's
Moderator: AdminGroup
Gunfighter. Led's
With my gunfighter and pedals connected to my blackbox, I have a single blue LED lit. Neither led for the stick or pedals is lit up. IS this normal? Everything works btw. Just no lights.
Re: Gunfighter. Led's
Here is a simple solution.
Option 1: wait for a new CFG version - might take a week or so.
Option 2: get your hands dirty.
If you go for Option 2, you're doing it at your own risk
before everything, reset to factory defaults.
Then:
a - go to CFG folder, wherever you saved it.
b - find zconfig.ini; open it in notepad or similar program
c - find User section in this file
d - add User=Developer as a new line in this section
e - if there is no User section, add the following at the end of the file:
[User]
User=Developer
f - save the file
g - open the CFG and load your profile
h - take off and shoot them all down.
Tell me if it works.
Option 1: wait for a new CFG version - might take a week or so.
Option 2: get your hands dirty.
If you go for Option 2, you're doing it at your own risk
before everything, reset to factory defaults.
Then:
a - go to CFG folder, wherever you saved it.
b - find zconfig.ini; open it in notepad or similar program
c - find User section in this file
d - add User=Developer as a new line in this section
e - if there is no User section, add the following at the end of the file:
[User]
User=Developer
f - save the file
g - open the CFG and load your profile
h - take off and shoot them all down.
Tell me if it works.
Best Regards,
AeroGator
AeroGator
Re: Gunfighter. Led's
UPDATE:
http://ftp.vkb-sim.pro/Programms/VKBDevCfg-C_v0_81_83.zip
Here it is, fresh and fragrant, the new FW. Hopefully, no more LED problems.
http://ftp.vkb-sim.pro/Programms/VKBDevCfg-C_v0_81_83.zip
Here it is, fresh and fragrant, the new FW. Hopefully, no more LED problems.
Best Regards,
AeroGator
AeroGator
Re: Gunfighter. Led's
I'm using Gunfighter with custom DIY grip, it has separate PCB and is not conected to GF. Red diode (stick diode) on BlackBox is blinking all the time ( i guess cause the standard K12 grip is not connected). Is there a way to turn off this red blinking?
-
- Posts: 21
- Joined: Mon Jun 05, 2017 14:56
- Has thanked: 2 times
- Been thanked: 4 times
Re: Gunfighter. Led's
Look here http://forum.vkb-sim.pro/viewtopic.php?f=3&t=1846.
About LEDs control. LED settings are the same for all VKB controllers.You can dim rgb KEDs only. BB LEDs may be switched on/off only.
About LEDs control. LED settings are the same for all VKB controllers.You can dim rgb KEDs only. BB LEDs may be switched on/off only.
Руководство пользователя по контроллерам VKB (VKB controllers User Guide) Ru&En
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
https://disk.yandex.ru/d/LlqiYtIrIetBOQ
Who is online
Users browsing this forum: No registered users and 46 guests