Hello, new owner of the gunfighter pro here. My stick doesnt twist to 11 oclock like most people mention theirs to do.
Is it because i might have attached it wrong or too tight?
Second when i move the stick forward i can hear a noise inside the base of the gunfighter that i dont hear when i move the stick left or right.
The noise comes from the metal parts that are moving inside the base.
Does anyone else have these issues?
Gunfighter pro newbie questions.
Moderator: AdminGroup
-
- Posts: 12
- Joined: Tue Feb 07, 2017 3:53
- Been thanked: 2 times
Re: Gunfighter pro newbie questions.
I dont have any of those problems. The noise could be down to it needing to bed in so will disappear with use.
As for the grip twisting have you tightened the locking pin up as that twist is only so you can off set the grip from center to make it more comfertable on your wrist.
As for the grip twisting have you tightened the locking pin up as that twist is only so you can off set the grip from center to make it more comfertable on your wrist.
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: Gunfighter pro newbie questions.
That twist is not really a twist per se, but a way for you to rotate your grip to the left and then tighten it again for when center-mounting your stick (e.g., when having a the stick attached to a sim pit). When using the Gunfighter as a side-mounted stick, you could loosen the grip lock and rotate the grip back to center, and then tighten it again to use it with a straight wrist.
Also, the noise could be anything, e.g., a spring creaking, etc. Can you describe this in more detail? Thanks.
Also, the noise could be anything, e.g., a spring creaking, etc. Can you describe this in more detail? Thanks.
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
- marcusstratus
- Posts: 75
- Joined: Sat Apr 29, 2017 5:54
- Has thanked: 51 times
- Been thanked: 21 times
Re: Gunfighter pro newbie questions.
Like rrohde said, the Gladiator Pro doesn't have a Z Axis twist. If that's what your asking about, it's likely your confusion is caused by the Gladiator (non-pro) having a twist. I mention this because I was confused about this myself. The difference is the metal gimbal inside the pro vs the plastic in the non-pro.
Re: Gunfighter pro newbie questions.
Thanks for the answers guys!
Now i understand how the twist works.
About the noise inside the base, see in this youtube video
https://www.youtube.com/watch?v=zrmAwMtniWk
The metal rod that rotates on top of that metal part i can hear it moving when i move the stick forward especially when i try to move it all the way forward.
The sound is like a "goup" or "gloup".
Now i understand how the twist works.
About the noise inside the base, see in this youtube video
https://www.youtube.com/watch?v=zrmAwMtniWk
The metal rod that rotates on top of that metal part i can hear it moving when i move the stick forward especially when i try to move it all the way forward.
The sound is like a "goup" or "gloup".
Return to “General discussions”
Who is online
Users browsing this forum: No registered users and 84 guests