VKB-SIM

IN STOCK

GNX DUAL THQ + SEM + FSM-GA COMBO

I bought this device. I made a mistake. It seems I flashed the wrong firmware. Now it's dead, the light doesn't light up and it doesn't recognize the bootloader. How can I solve it? What is the firmware for this device? How is it labeled and how to flash it?

Unplug from USB, short the 2 pins marked BOOT on the back of the GNX HID Controller with a small flat screwdriver, plug to USB, pull the screwdriver away.
Download the beta VKBDevCfg, then the attached firmware and flash it.

when I took off the controller and put it back and put the usb in it booted. without using 2 pins. put the appropriate firmware now everything is fine thanks