Broken VKB GF1 board.

Moderator: AdminGroup

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Broken VKB GF1 board.

Postby Andy » Tue Jan 10, 2023 1:25

Hi,

I have had many issues with my GunFighter Mk1 and have regularly had to break it down and service it, my experience of with this stick has been not so good. Most issues I have are to do with phantom inputs, sure people have helped but no permanent fix.

I have the issues again, and I took it apart to make sure everything was tight and this time it was too much for the board and the connector socket for connecting the board to the exterior output socket has fatigued away from the board. How can I order a replacement board? I have GF Mk1 with MCG and extension.

Kindest regards

Andy

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Broken VKB GF1 board.

Postby Andy » Tue Jan 10, 2023 22:37

I also noticed the one of the pins has fatigued where the grip extension connects.

A couple of images.

https://cdn.discordapp.com/attachments/ ... 6fc9f8.jpg
https://cdn.discordapp.com/attachments/ ... db1d64.jpg

Is it possible to buy a new GF base?

I assume my MK1 extension and MK1 MCG will not be compatible i I get a mk3 base?

User avatar
fallout9
Posts: 5158
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Broken VKB GF1 board.

Postby fallout9 » Tue Jan 10, 2023 22:45

I would suggest to get in touch with the local rep and ask for new connectors, so you could upgrade all your existing grips and extensions to ReVB and to get an upgrade kit from GunFighter MKI to GunFighter MKIII (the whole kit comes with new boards, new springs, new cams, but you basically only need the electronics upgrade).

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Broken VKB GF1 board.

Postby Andy » Wed Jan 18, 2023 1:02

Hi I have made a request, but have had no response. Seems a few other have also tried to contact VKB Europe. Is everything ok? I bought this stick because it is supposed to last. Now I cannot even get replacement parts.

User avatar
fallout9
Posts: 5158
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Broken VKB GF1 board.

Postby fallout9 » Wed Jan 18, 2023 3:45

Ticket number, please, so I could inform the EU rep about it.

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Broken VKB GF1 board.

Postby Andy » Wed Jan 18, 2023 20:54

#9764

thanks

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Broken VKB GF1 board.

Postby Andy » Sun Jan 22, 2023 2:02

Hi,

I still have not had a response from EU rep. I really need these parts to fix my flight stick. What is the issue?

User avatar
fallout9
Posts: 5158
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Broken VKB GF1 board.

Postby fallout9 » Mon Jan 23, 2023 5:04

Reminded him about it, sorry for the delay.

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Broken VKB GF1 board.

Postby Andy » Mon Jan 30, 2023 13:48

Going into week 3 of no response. Can i go through vkb usa? I have a business need for my stick. I have money for parts and shipping. I have a friend in usa who is happy to forward on shipping to me in uk. Will be faster than VKB europe i think.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Broken VKB GF1 board.

Postby Ron61 » Mon Jan 30, 2023 16:25

It is possible that there is no upgrade to version III anymore, it is not produced at the factory. IV version may appear soon. I would try to restore the missing connectors at a phone, electronics repair service. This is not a specialized connector, the problem is only in the sealing of this little thing.

Andy
Posts: 121
Joined: Thu Mar 02, 2017 18:12
Has thanked: 22 times
Been thanked: 9 times

Re: Broken VKB GF1 board.

Postby Andy » Thu Feb 02, 2023 21:01

I took this to an electronics repair shop, and they can solder a new connector on, but need to know which way up, and what type the connector is.
I will still need to replace the part that holds the grip.

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Broken VKB GF1 board.

Postby Ron61 » Thu Feb 02, 2023 23:42

MICRO JST 1,25
X.JPEG
JST 1.25 curved needle.jpg


Return to “VKB FSC Europe”

Who is online

Users browsing this forum: No registered users and 17 guests