Most dissapointing product I've ever bought (after help, Amazing product)

Moderator: AdminGroup

User avatar
fallout9
Posts: 5160
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Most dissapointing product I've ever bought

Postby fallout9 » Fri Oct 15, 2021 18:17

Please stand by, your ticket has been received and the local rep will send the parcel soon.

liojac
Posts: 3
Joined: Sun Oct 17, 2021 0:21

Re: Most dissapointing product I've ever bought

Postby liojac » Sun Oct 17, 2021 1:00

Attention.
I have exactly the same material.
In pictures 1 and 3 you can see the part next to the white elongated hole, especially in picture 1.
You should not try to insert the metal tip into this area but into the elongated hole.
It may be that this is just an impression of the photo but I prefer to intervene. Please excuse the translation from French.
Image

liojac
Posts: 3
Joined: Sun Oct 17, 2021 0:21

Re: Most dissapointing product I've ever bought

Postby liojac » Sun Oct 17, 2021 19:31

In English.
The metal tip must be inserted into the oval hole.
On the photo n°1 posted by Nanashanjin it seems that the parts have been badly adjusted. But I could be wrong.
Image

NanashiAnjin
Posts: 18
Joined: Tue Oct 12, 2021 19:32

Re: Most dissapointing product I've ever bought

Postby NanashiAnjin » Mon Oct 18, 2021 15:17

Thank you for your reply,

Yes, the pin is in the deeper hole, Im sure since I keep the stick relatively straight as well.
Biggest problem seems to be, with the extension the forward pressure, tilts the rear part of the extension upwards, hopefully I will be able to tighten the new fasteners a tiny bit more, so the extension will stay in place.

liojac
Posts: 3
Joined: Sun Oct 17, 2021 0:21

Re: Most dissapointing product I've ever bought

Postby liojac » Mon Oct 18, 2021 20:23

O.K. I suspected that it was impossible to assemble the parts of this fawn but I wanted to remove the doubt.
Your problem is really amazing.

NanashiAnjin
Posts: 18
Joined: Tue Oct 12, 2021 19:32

Re: Most dissapointing product I've ever bought

Postby NanashiAnjin » Wed Oct 20, 2021 18:13

Received the new fasteners!

small note, the new ones didn't have the straight side the previous ones have, they do not fit my stick, no worries I use the new screw in old fastener.
However the round fastener does fit way better into the extension that keeps coming loose.

The screws feel way better, I can definitely tighten them more tight.

Initial response is very good.

Also, with the old fasteners, I noticed loosening the dry clutch helped a bit, but gave the stick more wobble when releasing.
I've tighten the dry clutch again, and do expect the problem to be resolved.
I will let you know if it stays this way!

User avatar
fallout9
Posts: 5160
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Most dissapointing product I've ever bought

Postby fallout9 » Thu Oct 21, 2021 1:07

Thanks for the update.

NanashiAnjin
Posts: 18
Joined: Tue Oct 12, 2021 19:32

Re: Most dissapointing product I've ever bought

Postby NanashiAnjin » Wed Nov 03, 2021 13:48

The screw hasnt come loose since, mission succesfull.

Thank you for the help

User avatar
fallout9
Posts: 5160
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Most dissapointing product I've ever bought (after help, Amazing product)

Postby fallout9 » Wed Nov 03, 2021 19:06

Good to hear and thanks again for concluding the thread. Sorry about the trouble, but I'm convinced you'll enjoy it. Be well!


Return to “VKB FSC Europe”

Who is online

Users browsing this forum: No registered users and 15 guests