Hi
I have just received my new rudder pedals and connected them to my flight sim, which is P3D 4.5. They are working, but as well as controlling the rudder, everytime I depress the pedals they also control the elevators. Appreciate if someone could tell me how I fix this.
I am using Windows 10, and have configured and calibrated the pedals in P3D
Configuring VKB rudder pedals Mk IV
Moderator: AdminGroup
Re: Configuring VKB rudder pedals Mk IV
Probable your issue is not with the hardware, but with game assignment', in P3D controls look for elevator and clean VKB T-Rudder assignment.
Some games - don't know specifically P3D, like DCS World assign functions automatically for every controller (joy, throttle, pedal...) plugged, an result that more hinder than help, with throttle axis controlling ailerons, rudder pedal axis controlling elevator, etc.
Some games - don't know specifically P3D, like DCS World assign functions automatically for every controller (joy, throttle, pedal...) plugged, an result that more hinder than help, with throttle axis controlling ailerons, rudder pedal axis controlling elevator, etc.
-
- Posts: 3
- Joined: Mon Sep 16, 2019 13:54
Re: Configuring VKB rudder pedals Mk IV
Thanks for your advice. I agree with you that it is probably the assignment in P3D controls..................but I select the axis which is automatically defined when I depress a pedal. I then clear all other axis, and calibrate the pedals. So all should be good..........................so not sure what else I should be doing to de link the pedals controlling the elevator.
Any further suggestions appreciated
Any further suggestions appreciated
-
- Posts: 3276
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: Configuring VKB rudder pedals Mk IV
Maybe you should first calibrate the pedals in the configurator and only then start the game?
A screenshot from the Profile-Axes tab would help a lot.
A screenshot from the Profile-Axes tab would help a lot.
Re: Configuring VKB rudder pedals Mk IV
SquadronLeader wrote:..so not sure what else I should be doing to de link the pedals controlling the elevator.
When in PrePAR Settings - Controls, you select VKB T-Rudder in "Controller Type" their X (unique) axis appear assigned for elevator?
If not, probable some "virtual axis" of Black Box - besides the X axis are enabled and is automatically set by PrePAR Controls.
-
- Posts: 3
- Joined: Mon Sep 16, 2019 13:54
Re: Configuring VKB rudder pedals Mk IV
In case anyone else has the same problem - I managed to fix it by using the configuration tool. Open the profile, remove all the ticks, and just place a tick in the top left hand box - all worked well for me.
Who is online
Users browsing this forum: No registered users and 29 guests