Missing Screws - Gunfighter MK2 Tabletop

Moderator: AdminGroup

RpT
Posts: 6
Joined: Thu Mar 28, 2019 17:00
Has thanked: 2 times
Been thanked: 1 time

Missing Screws - Gunfighter MK2 Tabletop

Postby RpT » Thu Mar 28, 2019 17:31

Recently received my Gunfighter MK2 TableTop. It's a great stick but unfortunately it arrived without baseplate screws...

Have raised a support request but didn't get a reply (at least not yet), thinking as it's such a small piece I can just order replacements online.


Can anyone advise what screws to order? They are also the same fit as the ones on the top-place, for the stick itself (uses the supplied Allen key).

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Missing Screws - Gunfighter MK2 Tabletop

Postby Ron61 » Thu Mar 28, 2019 19:01

Where and when addressed? Show a photo of the place where there are no screws.

RpT
Posts: 6
Joined: Thu Mar 28, 2019 17:00
Has thanked: 2 times
Been thanked: 1 time

Re: Missing Screws - Gunfighter MK2 Tabletop

Postby RpT » Thu Mar 28, 2019 19:34

On the base plate no screws were included. Screen attached.
Attachments
IMG_20190325_200037.jpg

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Missing Screws - Gunfighter MK2 Tabletop

Postby Ron61 » Thu Mar 28, 2019 21:31

Worth seeing in the packages with cams and springs, perhaps they are there.

RpT
Posts: 6
Joined: Thu Mar 28, 2019 17:00
Has thanked: 2 times
Been thanked: 1 time

Re: Missing Screws - Gunfighter MK2 Tabletop

Postby RpT » Thu Mar 28, 2019 21:50

I of course checked all packaging (have fully set up the stick and tested it works with change of springs now too) - To make it work temporarily i have taken 2 screws from the top of the stick to use underneath but that's not ideal.

Just want to know what type of screw this is so I can buy online (or better yet VKB can send me the ones that were supposed to be included originally)!

Ron61
Posts: 3261
Joined: Tue Jan 15, 2013 23:56
Location: г.Минск
Has thanked: 44 times
Been thanked: 637 times

Re: Missing Screws - Gunfighter MK2 Tabletop

Postby Ron61 » Thu Mar 28, 2019 22:03

М4х20 DIN 7991,it is possible and others under the "cross."

RpT
Posts: 6
Joined: Thu Mar 28, 2019 17:00
Has thanked: 2 times
Been thanked: 1 time

Re: Missing Screws - Gunfighter MK2 Tabletop

Postby RpT » Thu Mar 28, 2019 22:50

Thanks!

RpT
Posts: 6
Joined: Thu Mar 28, 2019 17:00
Has thanked: 2 times
Been thanked: 1 time

Re: Missing Screws - Gunfighter MK2 Tabletop

Postby RpT » Fri Mar 29, 2019 0:42

FYI, for anyone reading. VKB have emailed me and are going to send some out. Was going to just order them myself but that's great so thanks ^_^

rtrski
Posts: 279
Joined: Mon Sep 11, 2017 0:20
Has thanked: 101 times
Been thanked: 135 times

Re: Missing Screws - Gunfighter MK2 Tabletop

Postby rtrski » Fri Mar 29, 2019 18:05

Just as an FYI mine were in the bag with the spare springs and alternate cams. There was a lot in there so they were a little tough to see and to get to without dumping the bag everywhere.
RH VKB GF Mk III + Modern Combat Grip *ULTIMATE* (12/17 GFII , upgraded), _powered_ deploy!
LH VKB GF Mk III + Kosmosima Prem (02/19 GFII, upgraded), *lateral* mounted
Feet: Slaw Viper RX Pedals [Sorry, VKB, too gorgeous]

RpT
Posts: 6
Joined: Thu Mar 28, 2019 17:00
Has thanked: 2 times
Been thanked: 1 time

Re: Missing Screws - Gunfighter MK2 Tabletop

Postby RpT » Fri Mar 29, 2019 18:21

@rtrski - Fair enough!

I'm 100% they were not in there in that case, went through everything including cams and springs bag in order to configure the stick (i changed the springs). There was another small bag with plastic spares but not in there either. Checked every piece of foam in the box twice, etc.

Anyway a very minor issue as they were probably overlooked but are commonly available (now i searched the part number as advised by Ron61) and VKB are even resolving this by sending them out!


Return to “VKB FSC Europe”

Who is online

Users browsing this forum: No registered users and 21 guests