Page 3 of 3
Re: Most dissapointing product I've ever bought
Posted: Fri Oct 15, 2021 18:17
by fallout9
Please stand by, your ticket has been received and the local rep will send the parcel soon.
Re: Most dissapointing product I've ever bought
Posted: Sun Oct 17, 2021 1:00
by liojac
Attention.
I have exactly the same material.
In pictures 1 and 3 you can see the part next to the white elongated hole, especially in picture 1.
You should not try to insert the metal tip into this area but into the elongated hole.
It may be that this is just an impression of the photo but I prefer to intervene. Please excuse the translation from French.
Re: Most dissapointing product I've ever bought
Posted: Sun Oct 17, 2021 19:31
by liojac
In English.
The metal tip must be inserted into the oval hole.
On the photo n°1 posted by Nanashanjin it seems that the parts have been badly adjusted. But I could be wrong.
Re: Most dissapointing product I've ever bought
Posted: Mon Oct 18, 2021 15:17
by NanashiAnjin
Thank you for your reply,
Yes, the pin is in the deeper hole, Im sure since I keep the stick relatively straight as well.
Biggest problem seems to be, with the extension the forward pressure, tilts the rear part of the extension upwards, hopefully I will be able to tighten the new fasteners a tiny bit more, so the extension will stay in place.
Re: Most dissapointing product I've ever bought
Posted: Mon Oct 18, 2021 20:23
by liojac
O.K. I suspected that it was impossible to assemble the parts of this fawn but I wanted to remove the doubt.
Your problem is really amazing.
Re: Most dissapointing product I've ever bought
Posted: Wed Oct 20, 2021 18:13
by NanashiAnjin
Received the new fasteners!
small note, the new ones didn't have the straight side the previous ones have, they do not fit my stick, no worries I use the new screw in old fastener.
However the round fastener does fit way better into the extension that keeps coming loose.
The screws feel way better, I can definitely tighten them more tight.
Initial response is very good.
Also, with the old fasteners, I noticed loosening the dry clutch helped a bit, but gave the stick more wobble when releasing.
I've tighten the dry clutch again, and do expect the problem to be resolved.
I will let you know if it stays this way!
Re: Most dissapointing product I've ever bought
Posted: Thu Oct 21, 2021 1:07
by fallout9
Thanks for the update.
Re: Most dissapointing product I've ever bought
Posted: Wed Nov 03, 2021 13:48
by NanashiAnjin
The screw hasnt come loose since, mission succesfull.
Thank you for the help
Re: Most dissapointing product I've ever bought (after help, Amazing product)
Posted: Wed Nov 03, 2021 19:06
by fallout9
Good to hear and thanks again for concluding the thread. Sorry about the trouble, but I'm convinced you'll enjoy it. Be well!