Hello all. I would like to know if it's possible to create a turbo trigger activating or deactivating it width a second stage trigger on a Gladiator NXT?
Thanks.
Turbo Trigger posible?
Moderator: AdminGroup
- DeadWalking
- Posts: 103
- Joined: Fri Jun 24, 2022 4:51
- Has thanked: 66 times
- Been thanked: 15 times
Re: Turbo Trigger posible?
A repeating button until turned off?
Could do a couple things I believe.
Macro or possibly Generator.
Fired via a ButtonAlt and/or boolean.
Could do a couple things I believe.
Macro or possibly Generator.
Fired via a ButtonAlt and/or boolean.
- DeadWalking
- Posts: 103
- Joined: Fri Jun 24, 2022 4:51
- Has thanked: 66 times
- Been thanked: 15 times
Re: Turbo Trigger posible?
This was one method I was thinking.
Using the main trigger as the Macro Start and the second stage as the Macro Stop.
Using the main trigger as the Macro Start and the second stage as the Macro Stop.
- DeadWalking
- Posts: 103
- Joined: Fri Jun 24, 2022 4:51
- Has thanked: 66 times
- Been thanked: 15 times
Re: Turbo Trigger posible?
Awesome stuff, I got the turbo working but it's opposite what I needed. I need main trigger to be normal but when pressing and holding all the way to the second pull button #2 it activates turbo on the main trigger button#1. Releasing trigger button 2 makes the main trigger to normal operation. Arthritis in my fingers no fun and some weapons are not "auto" one trigger pull per shot, so you have to keep meshing the trigger to shoot continuously. Please forgive me for not being clear. BTW I really apricate all your help this is really a fantastic tutorial.
- DeadWalking
- Posts: 103
- Joined: Fri Jun 24, 2022 4:51
- Has thanked: 66 times
- Been thanked: 15 times
Re: Turbo Trigger posible?
A single press on 1st Stage trigger requires just a bit of time before it registers
Small quirk to ButtonD method
Same Macro
Different Stage 1 Trigger Setup
No Booleans
Small quirk to ButtonD method
Same Macro
Different Stage 1 Trigger Setup
No Booleans
Return to “General discussions”
Who is online
Users browsing this forum: No registered users and 98 guests