Screw to lock Twist Grip

Moderator: AdminGroup

SantasGolfClub
Posts: 8
Joined: Mon Jul 26, 2021 9:01
Has thanked: 1 time
Been thanked: 1 time

Screw to lock Twist Grip

Postby SantasGolfClub » Mon Aug 15, 2022 5:14

I have the Gladiator NXT stick, which I use the twist for the rudder. I now have peddals. I see there is a place for a screw to lock the twist, but can't find my box, so - no screw.

Does anyone know the size? Maybe I can buy a new one?

Kaalrabistu
Posts: 9
Joined: Tue Jul 13, 2021 6:04
Been thanked: 1 time

Re: Screw to lock Twist Grip

Postby Kaalrabistu » Mon Aug 15, 2022 9:16

https://1drv.ms/u/s!AggxpKbBrw3I0E_3jMm4Gf738N84?e=cp06ma
https://1drv.ms/u/s!AggxpKbBrw3I0FCsz9-kgAukoD3K?e=wH0XnQ

Not sure this is the intended screw, but this fits in my SCG for GF3.

Looks like M3
7,5 mm

SantasGolfClub
Posts: 8
Joined: Mon Jul 26, 2021 9:01
Has thanked: 1 time
Been thanked: 1 time

Re: Screw to lock Twist Grip

Postby SantasGolfClub » Mon Aug 15, 2022 13:03

Thanks so much! That's incredibly helpful.
So basically, go to hardware shop and ask for a M3 screw, that's 7.5mm long?

SantasGolfClub
Posts: 8
Joined: Mon Jul 26, 2021 9:01
Has thanked: 1 time
Been thanked: 1 time

Re: Screw to lock Twist Grip

Postby SantasGolfClub » Mon Aug 15, 2022 13:09


Kaalrabistu
Posts: 9
Joined: Tue Jul 13, 2021 6:04
Been thanked: 1 time

Re: Screw to lock Twist Grip

Postby Kaalrabistu » Mon Aug 15, 2022 14:56

I would go for socket head cap screws like these, more like the original. I see theres only 6 or 8 mm lengths. If 8 mm is too long you could cut it or just go for 6mm.

Something like these
https://www.ebay.com.au/sch/i.html?_from=R40&_trksid=p2047675.m570.l1313&_nkw=m3+socket+head+ca&_sacat=0

I would also wait abit if you`re not in a hurry to see what VKB rep has to say on this.
Edit: Because VKB decides if your warranty is void if you mess it up with unoriginal parts.

SantasGolfClub
Posts: 8
Joined: Mon Jul 26, 2021 9:01
Has thanked: 1 time
Been thanked: 1 time

Re: Screw to lock Twist Grip

Postby SantasGolfClub » Mon Aug 15, 2022 15:18

Thanks very much. I’ll wait a bit for a rep reply. Good idea. Thanks.


Return to “General discussions”

Who is online

Users browsing this forum: No registered users and 19 guests