Hello
I looked everywhere and didnt see how to make it
I tried dz switch and it works good ! however only when i keep pressed a button, i dont have an alternate action for it .
how can i set it up like a curve for example where i can use alternate for on and off ?
Thanks
DZ switch alternate button
Moderator: AdminGroup
- fallout9
- Posts: 5186
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: DZ switch alternate button
Click on the cell representing the button you want to use a DZ Switch (1). Set that as ButAlt (2), with the Default State as On or Off (3), click on its Logical representation (4) and send it to another free cell on the chart (5) - I used here position 41.
Click on the cell representing button 41 (1) and set it as DZ Switch (2); set the axes you want affected by this control (3).
Click on one of the cells on the bottom row (1) and set it as Boolean (2). Set the Boolean to JMP (4) from 41 Logical (3) to 41 Physical (5).
Press Set to save.
Click on the cell representing button 41 (1) and set it as DZ Switch (2); set the axes you want affected by this control (3).
Click on one of the cells on the bottom row (1) and set it as Boolean (2). Set the Boolean to JMP (4) from 41 Logical (3) to 41 Physical (5).
Press Set to save.
Return to “General discussions”
Who is online
Users browsing this forum: No registered users and 95 guests