What springs are loded default with the Gunfighter III base?
Moderator: AdminGroup
-
- Posts: 9
- Joined: Sun Jun 20, 2021 14:31
- Has thanked: 4 times
What springs are loded default with the Gunfighter III base?
Hello from a new, excited owner of the Gunfighter MCGU just received this week in Germany. on first assembly I found the springs loaded with the included base on the week side. Doeas anyone know to happen which grade sprongs come preloaded with the base ? I can only asume they are all assembled to same specs, regardless of the grip included with. I found that Jesse Calder on his YT mentioned to use 2 50 grade springs per gimbal with his MCG U, the hardest included with the base howverr is one set of 40A. (I'd recomend VKB to inlude 50s with the Ultimate as they do with the extensions).
That's nitpicking on a high level, though and I am blown away by what I now hold in my hands - yet a lot of ideas and questions on the horizon.
That's nitpicking on a high level, though and I am blown away by what I now hold in my hands - yet a lot of ideas and questions on the horizon.
Last edited by quadrophoeniX on Sun Jun 20, 2021 23:52, edited 1 time in total.
- fallout9
- Posts: 5182
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: What springs are loded default with the Gunfighter III base?
The default springs are there only to hold the gimbal in place and not as a recommended setup. You could try different combinations of springs by following this guide.
Your excitement is delightful btw!
Your excitement is delightful btw!
-
- Posts: 24
- Joined: Sun Apr 25, 2021 1:44
- Has thanked: 15 times
- Been thanked: 3 times
Re: What springs are loded default with the Gunfighter III base?
Are they even in stock!?
North American shop still shows them out of stock
North American shop still shows them out of stock
- fallout9
- Posts: 5182
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: What springs are loded default with the Gunfighter III base?
There's stock left only on Ali at this time, but a new batch is under works.
-
- Posts: 24
- Joined: Sun Apr 25, 2021 1:44
- Has thanked: 15 times
- Been thanked: 3 times
Re: What springs are loded default with the Gunfighter III base?
Thanks @fallout9,
Eagerly awaiting my stock notification. Hopefully it doesn’t come when I’m at work and there’ll be enough stock to last a while.
Eagerly awaiting my stock notification. Hopefully it doesn’t come when I’m at work and there’ll be enough stock to last a while.
- fallout9
- Posts: 5182
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: What springs are loded default with the Gunfighter III base?
It'll be a large batch, so the issue at this time is only 'when' and not 'how many'
-
- Posts: 24
- Joined: Sun Apr 25, 2021 1:44
- Has thanked: 15 times
- Been thanked: 3 times
-
- Posts: 9
- Joined: Sun Jun 20, 2021 14:31
- Has thanked: 4 times
Re: What springs are loded default with the Gunfighter III base?
kissTheSky wrote:Are they even in stock!?
North American shop still shows them out of stock
They weren't in Europe when I checked - just for curiosity's sake. So, I signed up for the notification email and the very next day I got updated they were ready to order. Curiosity became itch, open goes the wallet and just a "few" very long days later it arrived. Showed it to my colleage, who is on TM Warthog, he skipped curiosity pase and passed straight on to itch. Now I just need to let him know about the base incl. TM adaptor being in stock
On topic: so the shipping/stock tension is unknown?
-
- Posts: 24
- Joined: Sun Apr 25, 2021 1:44
- Has thanked: 15 times
- Been thanked: 3 times
Re: What springs are loded default with the Gunfighter III base?
Well, congrats. My very old Saitek X45’s trigger got stuck 5-6 weeks ago, and this time I decided I’m not opening up to reseat the spring for the umpteenth time. IL-2 being the only flight sim I play, I can do with a KB-12 grip, but playing in VR, I need all the buttons I can get .
What I understood from fallout9’s post is that the stock springs are just to keep the gimbal steady during shipping, so if I had to guess, I’d say they were pretty light weight.
What I understood from fallout9’s post is that the stock springs are just to keep the gimbal steady during shipping, so if I had to guess, I’d say they were pretty light weight.
- fallout9
- Posts: 5182
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: What springs are loded default with the Gunfighter III base?
quadrophoeniX wrote:On topic: so the shipping/stock tension is unknown?
They're #20.
kissTheSky wrote:What I understood from fallout9’s post is that the stock springs are just to keep the gimbal steady during shipping, so if I had to guess, I’d say they were pretty light weight.
Just a metaphor But some people like a really loose grip and would leave it like that.
-
- Posts: 24
- Joined: Sun Apr 25, 2021 1:44
- Has thanked: 15 times
- Been thanked: 3 times
Re: What springs are loded default with the Gunfighter III base?
kissTheSky wrote:Thanks @fallout9,
Eagerly awaiting my stock notification. Hopefully it doesn’t come when I’m at work and there’ll be enough stock to last a while.
Did I call it, or did I call it? “In stock” notification email came while I was 2 hours in to the workday and by the time I got back home, NA store said there was only 1 left. I hope it was correct, placing the order and finding out there’s none left would be a crushing blow. I hope in my rush I didn’t forget to add any other accessories I may have wanted to the cart.
I know, I know, 1st world problems, .
- fallout9
- Posts: 5182
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 208 times
- Been thanked: 1218 times
Re: What springs are loded default with the Gunfighter III base?
There is just some stock shuffling until the new batch comes in. Congrats on the capture!
-
- Posts: 24
- Joined: Sun Apr 25, 2021 1:44
- Has thanked: 15 times
- Been thanked: 3 times
Re: What springs are loded default with the Gunfighter III base?
Thanks. Though if I’m honest, I’ll feel more comfortable once I receive the shipping confirmation.
Edit: I thought this was the new batch. I guess they’re being released as production progresses.
Edit: I thought this was the new batch. I guess they’re being released as production progresses.
-
- Posts: 9
- Joined: Sun Jun 20, 2021 14:31
- Has thanked: 4 times
Re: What springs are loded default with the Gunfighter III base?
fallout9 wrote:They're #20.
Found that info hidden but actually mentioned on the accessory spring SKU descrtiption...seems the only way to get hold of #50 grade is with an extension. I decided to experiment with stacked springs to evaluate the prfect tension disassembling and fit the Sace S gimbals.
@kissTheSky: they shipped within a couple of days and in EU it only took 2 work days from Netherlands to Germany doorstep. Perfectly executed. You'll love it
-
- Posts: 24
- Joined: Sun Apr 25, 2021 1:44
- Has thanked: 15 times
- Been thanked: 3 times
Re: What springs are loded default with the Gunfighter III base?
quadrophoeniX wrote:@kissTheSky: they shipped within a couple of days and in EU it only took 2 work days from Netherlands to Germany doorstep. Perfectly executed. You'll love it
Thanks!
The anticipation is building
Return to “General discussions”
Who is online
Users browsing this forum: No registered users and 28 guests