Open-Source 3D Printed VKB SCG Pinky Trigger Mod

Moderator: AdminGroup

SleeperService
Posts: 3
Joined: Mon Mar 16, 2020 21:20
Has thanked: 1 time

Open-Source 3D Printed VKB SCG Pinky Trigger Mod

Postby SleeperService » Mon Feb 01, 2021 23:19

Video here

Greetings! This is a design for a Pinky Trigger for the entire SCG grip family (so compatible with both L/R Standard/Premium variants on Gladiator NXT, Gladiator K, and GF2/3 bases). At least I think so. I only have GF3s, but I think the internals of the gladiator grip are the same.

Previous reddit WIP design post here.

Many moons ago, Cassiopee came up with a neato design for a trigger, which was written about on reddit here and also on the VKB forums right here. I think the design was solid, but in their own words, not easily reproduce-able, so I decided to create a new design from scratch and which solved the problems of jiggle. The new design needs an M2 x 10 machine screw and 2 x M2 nuts, but it works beautifully.

So without further ado, Thingiverse link and assembly instructions.

Thingiverse link has all STLs and printing instructions, plus parametric CAD models in both STEP and F3D formats. The trigger length is controlled by parameter trigger_length in the model - default is 22 mm, but you can adjust this if you have larger or smaller hands to whatever feels comfortable.

Return to “General discussions”

Who is online

Users browsing this forum: No registered users and 25 guests