CAM #10 too tight, does exist a CAM #5?

Moderator: AdminGroup

feehza
Posts: 2
Joined: Tue Oct 24, 2017 10:43

CAM #10 too tight, does exist a CAM #5?

Postby feehza » Fri Jan 26, 2018 21:18

Hello!
I find, that the CAM #10 does have a noticeable resistance after i move my Gunfighter for about 1/3 inch in any direction. That forces a circle movement into a square movement.
The reason is, the surface of the cam #10 is rising to abrupt.
Yes i know, its the softest cam available, but its not soft enough.
For myself i milled a more soften CAM with CNC. Since i havent the original measurements its not well balanced,
But the movement of the stick is more creamy without any blocking.

So, does VKB have a CAM #5 in their product assortment?

Sideslip
Posts: 35
Joined: Mon Nov 27, 2017 0:16
Has thanked: 4 times
Been thanked: 5 times

Re: CAM #10 too tight, does exist a CAM #5?

Postby Sideslip » Sat Jan 27, 2018 23:07

If you find the resistance too tight than use a weaker spring strength. #10 is the lowest. If you are referring to the way the force is very light at the center and very strong at the ends, that is just the way they designed it (so you can make very light corrections in the center). I only know of 3 cams, #10 #30 and the warthog cam to counter the heavy weight of the metal stick. #30 is more linear (more force at center, slightly less than #10 at the ends) but it has quite a strong center detente.

Personally I'd like a cam between #10 and #30 with the same soft center of #10 and same force at the end, and the higher force near center of the #30 cam to provide a more linear increase.

If you are making your own, copy #30 and overlay the center of #10 and you will probably have what you want. Heck you could probably get the shapes just using a simple scanner.

User avatar
AeroGator
Posts: 339
Joined: Wed May 31, 2017 7:40
Has thanked: 79 times
Been thanked: 134 times

Re: CAM #10 too tight, does exist a CAM #5?

Postby AeroGator » Tue Jan 30, 2018 7:30

Sorry I was too late to reply.
Sideslip replied quite well and right to the point, little to add if anything.
Just want to say that going ahead with making your own cams will not void the warranty, so don't hesitate to try!
The only thing, take care and don't damage the PCBs while replacing the cams.

Talking about making cross-bred (10/30) cams.... errr... we don't see it viable for the foreseeable future.
Who knows what can happen a year later, but for now there is little we can offer in this respect. Sorry.
Best Regards,
AeroGator

aklambda
Posts: 21
Joined: Mon Sep 18, 2017 0:28
Has thanked: 5 times

Re: CAM #10 too tight, does exist a CAM #5?

Postby aklambda » Mon Apr 23, 2018 8:28

VKB's competitor is offering new kinds of space cams that do not offer much resistence when going to the edges. They are very easy and light to move and are therefore great for space Sims. Does VKB have something similar? What cams and springs do people recommend for gunfighter for a great space sim experience? (I just ordered my yesterday)


Return to “General discussions”

Who is online

Users browsing this forum: No registered users and 6 guests