Page 1 of 1

Gunfighter Revision B

Posted: Wed Sep 27, 2017 1:16
by craighl4
I assume all Gunfighters currently in the wild are the original version and that if we already have one, we should NOT be ordering the Revision B MCG's?

Re: Gunfighter Revision B

Posted: Wed Sep 27, 2017 3:57
by DHRF
MCG Rev.B – Compatible with Gunfighter Rev.B only!

Re: Gunfighter Revision B

Posted: Wed Sep 27, 2017 4:16
by redribbon
DHRF wrote:MCG Rev.B – Compatible with Gunfighter Rev.B only!

So what is the difference between old one and new rev.b?

Re: Gunfighter Revision B

Posted: Wed Sep 27, 2017 4:30
by craighl4
DHRF wrote:MCG Rev.B – Compatible with Gunfighter Rev.B only!


I am aware of this. I am just trying to confirm that all existing Gunfighters are not revision b.

Re: Gunfighter Revision B

Posted: Wed Sep 27, 2017 6:37
by AeroGator
Let me re-post what I said in a different thread.

First, there is NO "NEW MODEL" - A and B versions are identical, technically and functionally, with a single difference: the contact group has been switched, what was on the top went to the bottom, and vice versa. We did it mainly to streamline the assembling process.

So, presuming you're wondering which MCG you should get:
IF you already have a GF, your choice should be MCG A;
IF you are going to get a GF, you should stay with MCG B.
IF you are going to buy an MCG set, then you don't have to bother about this A or B thing altogether.

Once again, the only difference between A and B is the juxtaposition of the parts of the contact group.

Re: Gunfighter Revision B

Posted: Wed Sep 27, 2017 6:40
by craighl4
Thanks for the clarification.

Re: Gunfighter Revision B

Posted: Wed Sep 27, 2017 6:56
by Echo1432
seriously, how many people bent their pins? I call BS.. this is utter crap, for every new grip is there going be a rev a and rev b? this is downright shitty. Myself and plenty of my friends bought into the gunfighter for the swappable grips and on the eve or preorder for the first of these interchangeable grips you guys swap the connector up? Are you going to at least offer kits for those of us with five month old "vintage" bases for us to make the switch?

Re: Gunfighter Revision B

Posted: Wed Sep 27, 2017 8:24
by redribbon
AeroGator wrote:Let me re-post what I said in a different thread.

First, there is NO "NEW MODEL" - A and B versions are identical, technically and functionally, with a single difference: the contact group has been switched, what was on the top went to the bottom, and vice versa. We did it mainly to streamline the assembling process.

So, presuming you're wondering which MCG you should get:
IF you already have a GF, your choice should be MCG A;
IF you are going to get a GF, you should stay with MCG B.
IF you are going to buy an MCG set, then you don't have to bother about this A or B thing altogether.

Once again, the only difference between A and B is the juxtaposition of the parts of the contact group.

Thanks for reply!
Was searching for it but couldn't find it since forum is in the mess.
A-version MCG for me than it is!

Re: Gunfighter Revision B

Posted: Thu Sep 28, 2017 11:49
by RecklessPrudence
I've got a slight worry. I pre-ordered a Gunfighter with no grip, because the savings were considerable once you converted USD into my local currency. I am intending to buy an MCG Pro to plug into it, but I'm aware some of the first-run Gunfighters had problems that meant they had to be returned. As my Gunfighter has not been tested (or even opened! NIB) since I received it, I am worried about what will happen once I finally plug my grip into it. If it's faulty, can I get a Rev. A to go with my grip? If not, assuming I get a Rev. B as replacement, what happens to my MCG Pro Rev. A, which would be useless with a Rev. A grip?

I know this is all moot if I didn't get one of the rare faulty first-run Gunfighters, but I'm still worried. Any reassurance you can give me would be appreciated.

Re: Gunfighter Revision B

Posted: Thu Sep 28, 2017 12:54
by AeroGator
RecklessPrudence wrote:I'm aware some of the first-run Gunfighters had problems that meant they had to be returned...... can I get a Rev. A to go with my grip? RevA/RevB... RevA/RevB....

First and foremost, this "some of the first-run Gunfighters had problems that meant they had to be returned" is not true, simple and plain.
You might be confusing us with some other business (I even guess which one), but the situation you depicted had never happen to VKB's Gunfighters.
(having said this I of course don't mean that we had never replaced a single unit. just the number of replacements was absolutely negligible, half a per cent or so).
Next, we are currently producing some extra RevA units that we will not sell but will keep for emergency like replacement or alike.
So if you have RevA base and RevA MCG, and against all odds something goes wrong, you can rest assured we will have enough RevA units to deal with your problem.

Re: Gunfighter Revision B

Posted: Thu Sep 28, 2017 15:01
by RecklessPrudence
Okay, cool, thanks. And yeah, I probably am getting confused - it's not particularly late here, but I'm tired and have been for days, no matter how much sleep I get, so I'm not thinking the clearest.