I'm just curious to see how everyone else has set theirs up?
Mine, #20 springs all around (light), dry clutch super lose and soft center for fast reactions and ease of tracking targets in StarCitizen.
So how do you have your Gunfighter configured?
Moderator: AdminGroup
Re: So how do you have your Gunfighter configured?
I converted a warthog handle with the adapter, Im using the stock springs and cams with the clutch backed right off. I am used to using a 10cm extension on a warthog stick so having less spring deflection feels normal for me. I fly primarily in starcitizen.
Re: So how do you have your Gunfighter configured?
I am coming from a T16000m. I have a GF Pro with extension. Using both 50 and 20 springs on each axis. Clutch backed off. Still getting a feel for it, might back off the springs. Primarily fly Wings Over Flanders Fields (WOFF) - WW1 flight simulator. Learned that it is really important to calibrate.
- rrohde
- Posts: 618
- Joined: Thu Oct 08, 2015 9:28
- Location: USA
- Has thanked: 681 times
- Been thanked: 242 times
Re: So how do you have your Gunfighter configured?
Using the Gunfighter Pro with the TM Warthog grip, I use the #10 cams for both axes, 2x #50 springs for both axes for a strong resistance towards the end of the range of the stick - but I am reconsidering that for the roll axis, as it's a bit too stiff for that. I have just a little damper dialed in.
VKB North America
https://VKBcontrollers.com
https://VKBcontrollers.com
Re: So how do you have your Gunfighter configured?
Question for those who have the warthog adapter.
On the adapter, there is a small hole that fits over a knob on the base of the gunfighter - http://imgur.com/Zeogawn
The whole on the adapter is wider than the knob which allows the stick to rotate. Is this normal, or have i installed it wrong?
On the adapter, there is a small hole that fits over a knob on the base of the gunfighter - http://imgur.com/Zeogawn
The whole on the adapter is wider than the knob which allows the stick to rotate. Is this normal, or have i installed it wrong?
Re: So how do you have your Gunfighter configured?
nneeee wrote:Question for those who have the warthog adapter.
On the adapter, there is a small hole that fits over a knob on the base of the gunfighter - http://imgur.com/Zeogawn
The whole on the adapter is wider than the knob which allows the stick to rotate. Is this normal, or have i installed it wrong?
That is normal, for example if you have your stick center, you can rotate your stick more to a 11 o'clock for a more ergonomically grip for it.
-
- Posts: 22
- Joined: Wed Apr 06, 2016 2:12
- Been thanked: 1 time
Re: So how do you have your Gunfighter configured?
I'm using the table top version with the Cougar grip. I have #10 cams installed with 2x #40 springs on the roll axis and 1x #40 & 1x #30 on the pitch axis. I also have the damper dialed in to stop any oscillations. Feels great for the Airbus & Boeing airliners I fly.
Re: So how do you have your Gunfighter configured?
RangerXML wrote:That is normal, for example if you have your stick center, you can rotate your stick more to a 11 o'clock for a more ergonomically grip for it.
Thanks, I thought it was a bit unusual at first but I'm getting used to it.
And to answer OPs question, I'm running 40 springs on all axis with the clutch loosened a bit. Mainly playing SC atm.
Return to “General discussions”
Who is online
Users browsing this forum: No registered users and 37 guests