Just curious at what everyones preferred setup was for space sims?
Currently I am using #30 springs on each axis and #10 cam.
I am finding that around the centre position that the stick is a little too sensitive for precision aiming. Does anyone know if changing the cam to #30 would be better for lowering the sensitivity around the centre?
Preferred Cam/Springs for Space sims
Moderator: AdminGroup
Re: Preferred Cam/Springs for Space sims
Right now I'm using the stock springs and cams, it seems fine though you need adjust the deadzone, and possibly the response curve. Changing the springs will change thing resistance but not the sensitivity. I wouldn't recommend changing the cams. On my left stick I have the #30 cams with #10 springs and you need more force to get the past the the detent than the #30 springs with smooth cams. So more resistance will maintain the same sensitivity with the added complications of potentially applying too much force and overshooting
Re: Preferred Cam/Springs for Space sims
Wait one day before getting into this curve thing.
We were pointed to a bug in the firmware, corrected it and now testing before making the debugged FW public.
We were pointed to a bug in the firmware, corrected it and now testing before making the debugged FW public.
Best Regards,
AeroGator
AeroGator
- marcusstratus
- Posts: 75
- Joined: Sat Apr 29, 2017 5:54
- Has thanked: 51 times
- Been thanked: 21 times
Re: Preferred Cam/Springs for Space sims
I think I've finished setting up my GF to my liking. Last night I was finally able to stay on target and pop some pirates in Star Citizen (after a year of hardly being able to dogfight with my X-55). I changed back to #10 cams on both Axes because the detent on #30 was throwing off accuracy. Also have #30+#10 Springs on both axes (not the same as #40 Springs, that was too stiff) I haven't messed with anything in VKBdevcfg yet, but I did set up curves in Star Citizen. I set the curves of both axes similar (used for pitch and yaw) starting at 1.7. I then edited the top half of the curve so it's S-shaped and that gave me good accuracy for aiming but felt natural with large maneuvers too. I set 0% deadzone on pitch and yaw axes because the GF is so accurate I needed as much movement as I could get in the center.
Re: Preferred Cam/Springs for Space sims
wow both a 10 + 30 springs... Ill have to try it. is that something that people commonly do? I reverted back to the 20. Maybe ill add the 10 to the 20 and see how that feels.
- marcusstratus
- Posts: 75
- Joined: Sat Apr 29, 2017 5:54
- Has thanked: 51 times
- Been thanked: 21 times
Re: Preferred Cam/Springs for Space sims
Don't know if it's something people commonly do, it was just what felt good to me. If it's too soft I have trouble with fine movements overshooting near zero point on axis (such as what's needed for non-gimble space combat) I actually further increased the Y axis to 20+30 because it was a little easier to move than the X. Now they're both comparable in movement.
Re: Preferred Cam/Springs for Space sims
I just ordered the Gunfighter MCG PRO and cannot wait to try it out in Star Citizen. Thanks for the feedback on this.
I will have to see what is feeling good for me in Space Sims. The competition is offering a custom Space Sim Cam for their stick. Is this something VKB might be offering as well? Or are the current cams and springs enough to adjust the stick properly for space flight?
I will have to see what is feeling good for me in Space Sims. The competition is offering a custom Space Sim Cam for their stick. Is this something VKB might be offering as well? Or are the current cams and springs enough to adjust the stick properly for space flight?
Re: Preferred Cam/Springs for Space sims
I changed the default cams and springs because the stick didnt center even with the friction dampener all loose.
Now i use the hard center cams with the weakest springs and its feels better.
But i have to say that i didnt use my Gunfighter that much because without the MCG grip and only a T16k for the lefthand i dont have enough buttons for sapce sims.
Now i use the hard center cams with the weakest springs and its feels better.
But i have to say that i didnt use my Gunfighter that much because without the MCG grip and only a T16k for the lefthand i dont have enough buttons for sapce sims.
-
- Posts: 1
- Joined: Tue Apr 10, 2018 0:42
Re: Preferred Cam/Springs for Space sims
I went to the #30 cams and #10 springs and it seems about perfect for Elite: Dangerous for both combat and racing purposes. I haven't tried the Gunfighter in Star Citizen yet, but I suspect it will do well there, as well.
If I ever pick up another serious flight sim, I might have to have two Gunfighters - one for space sim and one for flight sim. Because the default cam setup would be much more to my taste for flight sim, and switching cams just to switch games is way too much trouble.
This is the best stick I've ever owned, hands down. It's not even close. I finally have a stick that's every bit as good as my MFG Crosswind pedals (and this is a very high compliment, let me tell you)! I can hardly wait until the MCG Pro is available again so I can get one of those. Not to mention one of your throttles when those become available - I'm still stuck using the throttle from a Saitek X-56, and it feels so incredibly inadequate when my stick and pedals are so good.
If I ever pick up another serious flight sim, I might have to have two Gunfighters - one for space sim and one for flight sim. Because the default cam setup would be much more to my taste for flight sim, and switching cams just to switch games is way too much trouble.
This is the best stick I've ever owned, hands down. It's not even close. I finally have a stick that's every bit as good as my MFG Crosswind pedals (and this is a very high compliment, let me tell you)! I can hardly wait until the MCG Pro is available again so I can get one of those. Not to mention one of your throttles when those become available - I'm still stuck using the throttle from a Saitek X-56, and it feels so incredibly inadequate when my stick and pedals are so good.
Re: Preferred Cam/Springs for Space sims
I'm using 2×#50 spring and the W cam, for metal Warthog grip on the Gunfighter Pro extension.
I sure would like to be able to get my hands on a revA-compatible MCG Pro to replace the hunk of metal... hopefully the June shipment to the EU store will last more than the 48h the April shipment did.
I sure would like to be able to get my hands on a revA-compatible MCG Pro to replace the hunk of metal... hopefully the June shipment to the EU store will last more than the 48h the April shipment did.
Return to “General discussions”
Who is online
Users browsing this forum: No registered users and 31 guests