I would like to use one one of the K-switches on my SEM to adjust the frequencies in DCS. With the center press I would like to toggle through the different frequency digits and up/down would adjust them. I.e. the center press would need to toggle between up to 5 subshifts (one subshift for one frequency digit).
What is the best way to achieve that? I could not find a way to switch through the different subshifts with one physical button.
Many thanks in advance!
Cycle through SubShifts with one button: One K-switch for setting frequency in DCS
Moderator: AdminGroup
-
- Posts: 3280
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 45 times
- Been thanked: 637 times
Re: Cycle through SubShifts with one button: One K-switch for setting frequency in DCS
For this there is a Modal Switch function that allows you to multiply buttons. For example, you can make four from one physical encoder by switching to the desired one with a flip switch on the SEM.
Re: Cycle through SubShifts with one button: One K-switch for setting frequency in DCS
Thanks for the feedback!
Now, instead of the 4x pos. MODE Switch I would like to use a single button as Modal Switch.
I tried using a Cyclic Switch to toggle through the modes, but that does not work as the Cyclic button press is only momentarily.
Is there a method to toggle through several (virtual) radio buttons with only one physical button?
Now, instead of the 4x pos. MODE Switch I would like to use a single button as Modal Switch.
I tried using a Cyclic Switch to toggle through the modes, but that does not work as the Cyclic button press is only momentarily.
Is there a method to toggle through several (virtual) radio buttons with only one physical button?
Return to “Manuals and Howtos”
Who is online
Users browsing this forum: Google [Bot] and 11 guests