VKB-SIM

NJoy32 Family Controllers Manual 2.18
https://mega.nz/file/VBN2wIZR#UXXWFXe4C ... _PXxzWWw9s

Shared POV and Mouse modes on Ministick
2.4.11. Virtual mouse Page 27
4.3.14. uStick Switch Page 70
Chapter 6. HAT/POV parameters Page 113
6.3.4. Mouse Page 115
6.4. Ministick axes binding Page 116
Chapter 7. Boolean functions Page 117
7.2. NOT Page 118


I built this on SCG/Kosmosima Ministick.
Should be easily adapted to an MCGP/U making sure to use the correct POV#s in the uSSw uStick Switches.


Mouse Mode Relative and Always On.
Editing # POV is not needed for adding Mouse Mode on the Profile >> POVs page.
Keep your default/desired POV count as normal.


Remove Ministick axes from being visible.
Assuming no joy axes are needed in Mouse Mode.


Setup uSSw uStick Switches


Can ignore it, but I like to set things that won't be fired to No Function.


Set up Mouse Mode POV ID.
Using the POV ID that matches the desired Ministick to copy the Axes IDs.


Setup Boolean to fire the Mouse Mode POV toggle.

TempoB Style version

4.3.18. Tempo Page 80

Using the 1st and 2nd Steps/Images from above:
- Global >> Common Page
- Profile >> Axes Page


Then
Setup Tempo 1 and uSSw uStick Switches


Showing the Logical layer's setup/logic.


Setup single Boolean to fire both uSSw uStick Switches when the long press of the Tempo 1 is fired virtually.
The virtual check is very specific here. Can be a Logical check also if there was a need for the additional Logical output for in game use.

Reserved for potential uPOV switch version

this works great as described how can we add left mouse click when pov2 is active (mouse) if it on pov1 (8 head switch) I want it continue as button click not mouse click

I followed the instruction but could not figure out how to assign left mouse click to B1 when pov2 (mouse) is active. How can I achieve this?