Good day,
i have the following combo:
https://vkbcontrollers.com/?product=gnx ... m-ga-combo
I would like to understand what additional components I need to purchase so I can use the 2 throttles separately.
So in the end I would have 3 items:
1 THQ
1 THQ
1 Combo with the SEM + FSM mounted on the bracket.
Thank you
Parts needed to make standalone GNX modules
Moderator: AdminGroup
- fallout9
- Posts: 5158
- Joined: Wed Oct 03, 2018 20:37
- Has thanked: 207 times
- Been thanked: 1217 times
Re: Parts needed to make standalone GNX modules
So, if I understand correctly, you got the combo and want to rearrange it so you could have 3 independent units: 1 THQ, 1 THQ, 1 SEM with FSM-GA on MFH.
First, you would need 2 more GNX HID Controllers, as each one of the units above would need one.
Then, you'll need 4 side covers (you have only 2 and need 2 for each THQ and SEM).
Finally, you'll need a JST to USB cable to connect internally to the SEM and link it externally to FSM-GA, so the USB port on the SEM would remain available for connecting it to computer.
First, you would need 2 more GNX HID Controllers, as each one of the units above would need one.
Then, you'll need 4 side covers (you have only 2 and need 2 for each THQ and SEM).
Finally, you'll need a JST to USB cable to connect internally to the SEM and link it externally to FSM-GA, so the USB port on the SEM would remain available for connecting it to computer.
Return to “Manuals and Howtos”
Who is online
Users browsing this forum: No registered users and 16 guests