VKB-SIM

Hello everyone. I have a GUNFIGHTER MK.III with an F-14 handle, downloaded the latest VKBDevCfg-C_v0.91.96, flashed it with the file _BlackBox_MK2_GF_F14_v2_05_5.

VKB pedals are connected to the same blackbox. I don’t know if I need to flash something else for them !?

I want to make it so that while on the handle the weapon selector is in the uppermost position (sp/ph) (without pressing) - the pedals work like a brake of the left and right wheels, respectively, and in any other position of the selector - do they work like normal pedals? Can I do this?

And if it is possible, can you create a profile, or simply explain point by point how this is done? And then something is very scary and it's not clear it all looks)

Hi there! If your rudders are connected to the F-14's Black Box you only need to calibrate the whole assembly: pitch, roll, twist, rudders. Here's a video about flashing and calibration the F-14 assembly. You're already flashed at the latest stable firmware, so you could skip that part, you could continue from pressing the Default button and recalibrating; when calibrating include the rudders in the process too.

About having 2 axes on the rudders do like this:

- in Profile/Buttons/Physcal Layer check the Poll tab in the right side of the chart;
- put the Selector in SP/PH position;
- click mouse on the cell that's lighting up on the chart (1);
- in the new window set that button as AUX Axes (2), its function to Switch (3), Source: 7 (4) and Target: 8 (5).


- navigate to Profile/Axes/Logical Axes and set up Axis 8 like shown (1);
- when done press the Set button (2) to save tha changes.

Now you'll have 2 axes on the rudders, depending on the SP/PH button; just assign in game one of them to brakes and the other to rudders.
(if you want to still have a button use on the SP/PH that's also possible, but a bit more complicated; let me know though)

fallout9 wrote:Hi there! (if you want to still have a button use on the SP/PH that's also possible, but a bit more complicated; let me know though)

Eah i need to still have a button use on sp/ph

all resolverd by Ron61)