Flashing red light after programming folding trigger

Moderator: AdminGroup

McGraw
Posts: 26
Joined: Fri Mar 22, 2019 2:03
Has thanked: 1 time
Been thanked: 2 times

Flashing red light after programming folding trigger

Postby McGraw » Sat Mar 23, 2019 0:30

Hello.

Gunfighter Pro Mkii

Software 0.89.76 firmware 1.96.7. Not flashed firmware.

My stick works fine and I’ve got the safe/armed buttons programmed and working fine.

As soon as I check the safe button on the trigger and apply, the stick light on the black box starts flashing red.

If I reset it goes back to green.

Just to stress, everything works fine even though the light is flashing red.

What am I doing wrong?

Thanks.

User avatar
fallout9
Posts: 5158
Joined: Wed Oct 03, 2018 20:37
Has thanked: 207 times
Been thanked: 1217 times

Re: Flashing red light after programming folding trigger

Postby fallout9 » Sun Mar 24, 2019 8:06

You could try some more recent software and firmware from here: http://alex-oz.strana.de
What do you mean by ‘Not flashed firmware’?

User avatar
AeroGator
Posts: 827
Joined: Wed May 31, 2017 7:40
Has thanked: 378 times
Been thanked: 479 times

Re: Flashing red light after programming folding trigger

Postby AeroGator » Tue Mar 26, 2019 5:33

fallout9 wrote:You could try some more recent software and firmware from here: http://alex-oz.strana.de
What do you mean by ‘Not flashed firmware’?

That said, I would only recommend this to very, very experienced users.
VKB will only stand behind the FWs released through our official ftp. FWs, even created by ourselves, taken from any alternative sites, may be either beta, or experimental, or containing intentionally implanted bugs.
So think twice before using it.
Best Regards,
AeroGator

McGraw
Posts: 26
Joined: Fri Mar 22, 2019 2:03
Has thanked: 1 time
Been thanked: 2 times

Re: Flashing red light after programming folding trigger

Postby McGraw » Thu Mar 28, 2019 1:17

Ok thanks.

Sorry, I seem to have posted this to the wrong section!

Not flashed firmware = it has the firmware it shipped with.

I’ll wait for the next firmware and vkbcfg versions and see what they bring.

It’s all ok apart from the flashing.

PhoenixCNE
Posts: 38
Joined: Sun Jan 15, 2017 23:44
Has thanked: 13 times
Been thanked: 6 times

Re: Flashing red light after programming folding trigger

Postby PhoenixCNE » Thu May 23, 2019 2:05

I am also having this issue with the red light flashing if I change any of the folding trigger settings. Everything functions as it should but the light flashes. This is with FW version 1.96B and VKBdevcfg version 0.90.06. Not a pressing matter as all works fine, just odd the light blinks and thought I would add to this.


Return to “Manuals and Howtos”

Who is online

Users browsing this forum: Google [Bot] and 14 guests