Often when using the Master Mode hat it changes mode from POV to Axis(or Axis to POV). This is unintentional.
Is there any way to set the time length of the long press? To me it feels less than a second. I would like to make it 2 - 2.5 seconds.
POV/Axis Hat: Possible to make the 'Long Press' longer?
Moderator: AdminGroup
-
- Posts: 3276
- Joined: Tue Jan 15, 2013 23:56
- Location: г.Минск
- Has thanked: 44 times
- Been thanked: 637 times
Re: POV/Axis Hat: Possible to make the 'Long Press' longer?
How much is in the parameter Tempo Time? It seems to me that a max of 500 ms is more than enough. I use 200-250 ms myself.
And then you can fall asleep and get nothing .
And then you can fall asleep and get nothing .
Re: POV/Axis Hat: Possible to make the 'Long Press' longer?
Thanks, I had to look up Tempo Time. I thought that would be with the button or maybe axis option. I found it and it was set to 300. But the max is 500, and that's only .5 seconds. Not much difference for me. But I guess my question is answered. The longest it can be set is to half a second? Wish it was at least a second or 2. For me, that would help avoid mistakes with my fat heavy fingers.
Re: POV/Axis Hat: Possible to make the 'Long Press' longer?
Snacko wrote::?
Don't despair. I took your question to the higher level, it might be dealt with in future firmware updates. No firm promise but your voice was heard.
Best Regards,
AeroGator
AeroGator
-
- Posts: 1163
- Joined: Mon May 12, 2008 9:10
- Location: Минск
- Has thanked: 12 times
- Been thanked: 125 times
Re: POV/Axis Hat: Possible to make the 'Long Press' longer?
Make some changes in Tempo Time ( added 1000 ms, deleted 350 ms)
v1_95_E(2) / VKBDevCfg-C_v0.89.13
Try it.
v1_95_E(2) / VKBDevCfg-C_v0.89.13
Try it.
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
Re: POV/Axis Hat: Possible to make the 'Long Press' longer?
1000 seems to make a big difference for me. Thanks!
I have always been confused if I can used my saved profiles after I Flash new firmware and use new software????
Is it safe to 'Set' a Profile that was created/saved on an earlier version of the Firmware & Software? Or will that cause problems? (I don't want to have to start from scratch and then test it all again. )
I have always been confused if I can used my saved profiles after I Flash new firmware and use new software????
Is it safe to 'Set' a Profile that was created/saved on an earlier version of the Firmware & Software? Or will that cause problems? (I don't want to have to start from scratch and then test it all again. )
-
- Posts: 1163
- Joined: Mon May 12, 2008 9:10
- Location: Минск
- Has thanked: 12 times
- Been thanked: 125 times
Re: POV/Axis Hat: Possible to make the 'Long Press' longer?
Sometimes it can be hard to guess, but usually everything is fine.
Крайние прошивки и софт / Latest firmware & software
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
viewtopic.php?f=15&t=908
http://alex-oz.strana.de
Return to “Manuals and Howtos”
Who is online
Users browsing this forum: No registered users and 28 guests