How to activate virtual mouse GF2Pro+MCG Pro?

Moderator: AdminGroup

LeLv30_Superbus
Posts: 5
Joined: Sun Jun 03, 2018 18:11

How to activate virtual mouse GF2Pro+MCG Pro?

Postby LeLv30_Superbus » Sun Jun 03, 2018 19:01

2.4.11. Virtual mouse
Joystick buttons and axes can be used to control virtual mouse. Use control items of Mouse group to set up virtual mouse. Choose mouse type from Mouse combo box. [...]

Hi everyone, I'm probably just stupid but I can't figure out how to add a "mouse group" in the configurator manual NJoy32_2_8_En.pdf. I only have the kb part, seen in the screenshot:

vkb_conf_mouse.png


I tried searching this forum, to no avail. Please advice. Thank you in advance.

Code: Select all

Report generated by VKB Device Configurator 3.6.2018 18:06:47
Controller : VKB NJoy32 PRO v1.936
Number of logical buttons : 128
Number of HATs : 2
MOUSE - Not used
Virtual Keyboard : Not used
Multimedia Controls : Not used
Windows system Controls : Not used

User avatar
Victorus
Posts: 1027
Joined: Wed Sep 21, 2011 13:25
Has thanked: 160 times
Been thanked: 132 times

Re: How to activate virtual mouse GF2Pro+MCG Pro?

Postby Victorus » Sun Jun 03, 2018 19:48

https://drive.google.com/open?id=1ojzm-lJM4BlPHnGRqSdAdqRsSr2yOsIo
Appendix I.Zconfig.ini file description
[User] User=Developer Enables Macro, LEDs, virtual mouse using.

LeLv30_Superbus
Posts: 5
Joined: Sun Jun 03, 2018 18:11

Re: How to activate virtual mouse GF2Pro+MCG Pro?

Postby LeLv30_Superbus » Mon Jun 04, 2018 0:54

Thanks a mouse appears now. Something else missing, though.

vkb_conf_mouse2.png


I have no idea what most of these settings are supposed to be. I'm trying to use axis 5 and 6 which (I think) is the ministick on the left?

vkb_conf_mouse3.png

LeLv30_Superbus
Posts: 5
Joined: Sun Jun 03, 2018 18:11

Re: How to activate virtual mouse GF2Pro+MCG Pro?

Postby LeLv30_Superbus » Mon Jun 04, 2018 20:53

Just in case I didn't make myself clear: the menu item appears in the configurator software now. However, nothing actually happens when I try to activate a virtual mouse with a mouse on/off button or with "Always on".

Seawind
Posts: 4
Joined: Fri Jun 01, 2018 19:16

Re: How to activate virtual mouse GF2Pro+MCG Pro?

Postby Seawind » Mon Jun 04, 2018 20:55

Very much interested in this answer as well! And stuck in the similar steps after enabling developer mode.

For me, the intention is to use the left ministick on my MCG Pro as mouse in VR:

ministick movement = mouse movement
click left ministick = left mouse click
shift button + click ministick = right mouse click
shift button + ministick up/down = mouse scroll

I have a separate support post where some of this may be answered though, I haven't yet managed to think through it and test. Maybe it helps?
viewtopic.php?f=25&t=3140

Seawind
Posts: 4
Joined: Fri Jun 01, 2018 19:16

Re: How to activate virtual mouse GF2Pro+MCG Pro?

Postby Seawind » Mon Jun 04, 2018 21:17

Answering myself, I got the left mouse click upon click on left ministick to work via those instructions, and mouse movement to work if I chose "Relative" mode rather than "Absolute". Axis where 6 and 5. I also set Rate to 16.

LeLv30_Superbus
Posts: 5
Joined: Sun Jun 03, 2018 18:11

Re: How to activate virtual mouse GF2Pro+MCG Pro?

Postby LeLv30_Superbus » Mon Jun 04, 2018 22:02

Thanks Seawind, but I had read that thread before and didn't find answers to my problem.

However I was able to solve my problem myself - I just don't know how I did it :? . Today when I rebooted the PC, the mouse started to work. I had (almost) randomly tried all settings I could think of in the configurator. The axes still go wrong way but that's probably easy to change.


Return to “Manuals and Howtos”

Who is online

Users browsing this forum: No registered users and 2 guests