Elite Dangerous

Moderator: AdminGroup

TheAlchemist
Posts: 11
Joined: Wed May 16, 2018 11:17

Elite Dangerous

Postby TheAlchemist » Fri May 18, 2018 2:13

The Gladiator is great at flight sims however with ED it way too sensitive. I wondered how others went with this or even if someone has a cfg they are willing to share.

Cheers

Atriden
Posts: 3
Joined: Tue Jul 17, 2018 22:51
Has thanked: 1 time

Re: Elite Dangerous

Postby Atriden » Tue Jul 17, 2018 23:06

Hi Mate,

I have been trying to do the same by using WIZZO and VKBDevcfg but its pretty hard to understand.

Have you found a way to make it less sensitive ?

User avatar
Victorus
Posts: 1027
Joined: Wed Sep 21, 2011 13:25
Has thanked: 160 times
Been thanked: 132 times

Re: Elite Dangerous

Postby Victorus » Wed Jul 18, 2018 0:04


Atriden
Posts: 3
Joined: Tue Jul 17, 2018 22:51
Has thanked: 1 time

Re: Elite Dangerous

Postby Atriden » Wed Jul 18, 2018 1:18

Hi Victorus,

I cannot seem to access the relative curves as shown in the manual https://imgur.com/a/lyX8cIp

Do you know where to access it from VKBDevcfg https://imgur.com/a/h3zkIoo?

Atriden
Posts: 3
Joined: Tue Jul 17, 2018 22:51
Has thanked: 1 time

Re: Elite Dangerous

Postby Atriden » Wed Jul 18, 2018 1:54

I finally found how to access the curves.https://imgur.com/a/h3zkIoo

However, I am not sure if it is working as intended as I am not experiencing any difference. I have checked the eq as suggested in the manual but it still wont apply.

Got any new suggestions ?

TheAlchemist
Posts: 11
Joined: Wed May 16, 2018 11:17

Re: Elite Dangerous

Postby TheAlchemist » Wed Jul 18, 2018 7:47

I have kinda given up as I couldnt find any answers. Using the response curves works at supercruise etc but not at say docking speeds. This is where the stick lets itself down, imo.

Sideslip
Posts: 35
Joined: Mon Nov 27, 2017 0:16
Has thanked: 4 times
Been thanked: 5 times

Re: Elite Dangerous

Postby Sideslip » Sun Jul 22, 2018 22:06

The stick does not know when you are at super cruise or if you are docking... The response curve is either working or it is not. You of course have to check the box on the physical axis to enable the response curve, and you need to press the Set button or nothing will have changed on-board the stick/base.

Sideslip
Posts: 35
Joined: Mon Nov 27, 2017 0:16
Has thanked: 4 times
Been thanked: 5 times

Re: Elite Dangerous

Postby Sideslip » Sun Jul 22, 2018 22:18

Atriden wrote:I finally found how to access the curves.https://imgur.com/a/h3zkIoo

However, I am not sure if it is working as intended as I am not experiencing any difference. I have checked the eq as suggested in the manual but it still wont apply.

Got any new suggestions ?


- You say you checked the Eq box, yet your screenshots show you didn't.

- Unless you have some really weird control setup, it looks like you are applying a curve to the wrong axis (if somehow the stick was not set to axes 1 and 2). If however axes 1 and 2 are really your stick's movement, then you have axes 1 and 2 mode set to relative... YOU DO NOT FLY WITH A RELATIVE AXIS. So unless you have some crazy setup, you have your settings all wrong. You should probably reset the device to default and start over again.

- When setting a curve, 128 corresponds to "full travel". If you put 100% as anything less than 128, you will not be able to achieve 100% of the axis.


Return to “Manuals and Howtos”

Who is online

Users browsing this forum: No registered users and 1 guest