Page 1 of 1

T-Rudders Mk.IV Map to Keyboard Controls?

Posted: Thu Mar 29, 2018 20:38
by thestardawg
Hello,

Has anyone gotten the rudders to work for leaning in first person video games? PUBG, ARMA?

Wasn't sure if there a program that could bind it?

Thanks,

Re: T-Rudders Mk.IV Map to Keyboard Controls?

Posted: Fri Mar 30, 2018 7:32
by tasev1
Yes, also interested in this. Trying to find a way to use the pedals in Arma 3 for helicopter flying

Re: T-Rudders Mk.IV Map to Keyboard Controls?

Posted: Fri Mar 30, 2018 7:36
by tasev1
Answer found, at least for ARMA - you must disable 'recognize generic controls' in the steam controller settings.

Re: T-Rudders Mk.IV Map to Keyboard Controls?

Posted: Wed Apr 04, 2018 19:30
by Sokol1
You want that rudder input send keypress?

Can do this through Joy2Key, or using VKB DevCfg set "Axis to buttons" function - rudder axis movement for right and left will press 2 buttons, and then assign this buttons on games for lean.

I use T-Rudder in ARMA#. Have issue the their extra virtual axes because every time try map something in ARMA3 controls one of this axis are picked first, so have to disable and hidden this axes (they are used for "differential brakes" emulation.

Re: T-Rudders Mk.IV Map to Keyboard Controls?

Posted: Thu Apr 05, 2018 5:39
by thestardawg
Thanks Sokol1,

I'm going to give this a try. I think it would be a huge game changer, especially if it's at all fluid like I hope.

Re: T-Rudders Mk.IV Map to Keyboard Controls?

Posted: Sun Jun 03, 2018 18:55
by thestardawg
So after a few months trying to figure this out, I come asking for help.

All I'm trying to do is map the Z-Axis to keyboard presses.

Example. If I press the left pedal I'm trying to get it to lean left or press the Q keyboard Key. So as long as I'm holding left pedal, hold q.

Can someone help me out?

Re: T-Rudders Mk.IV Map to Keyboard Controls?

Posted: Sun Jun 03, 2018 22:30
by Victorus
mapping.png

Enable mapping and virtual keyboard
axesa2b.png

Enable and set up A2B (axes to buttons conversion) You will get 3 buttons. ## 1,2,3 in this example
left.png

Set But #3 as keystroke Q
center.png

Set but #2 (center) as No function
right.png

Set But #1 as keystroke R
Press Set.
Details here https://drive.google.com/open?id=1ojzm-lJM4BlPHnGRqSdAdqRsSr2yOsIo
In my example pedals Mk19_3 attached to Tiny Box so mainaxis is #1, X. Make the same settings for your axis.