How to Calibrate your Gunfighter w/ MCG/MCG PRO correctly
Posted: Fri Dec 22, 2017 3:45
The goal is to be able to capture all available axes in the calibration procedure: the Gunfighter's pitch and roll axes, as well as the ministick, trigger and brake axes in the MCG/MCG PRO.
1) Don't use the native Windows calibration utility!
2) Use WIZZO GF Edition (http://ftp.vkb-sim.pro/Programms/wizzo_gf_0_98.zip) -- or -- VKBDevCfg w/ MCG support (http://ftp.vkb-sim.pro/Programms/VKBDev ... 83_8_5.zip) for calibration.
Note: Before continuing, ensure that the foldable trigger is in the center position (MCG PRO only)
3) Flip the foldable trigger in the up position (MCG PRO only).
4) Press the trigger, and then let go if it to return it to the center position (MCG PRO only).
5) Click ‘Start’ (calibration button) in WIZZO -- or -- click the ‘Start Calibr’ button in VKBdevCfg; the SYS LED on the Blackbox starts blinking (WIZZO displays CALIBRATING label).
6) Move the stick through its full range (pitch and roll axes).
7) Move MASTER MODE (РЕЖИМ КБО) ministick on the MCG’s head through its full range.
8 ) Move GATE CONT (УПРАВ СТРОБ) ministick on the MCG’s head through its full range.
9) Squeeze the BRAKE lever fully.
10) Move the foldable trigger forward and backward (full range) (MCG PRO only)
11) If VKB T-Rudders are connected to the Gunfighter's BlackBox - move the T-Rudder axis through its full range as well.
12) Click the 'STOP' button (WIZZO) -- or -- click the 'End Calibr' button (VKBdevCfg); the joystick will restart. WIZZO closes automatically (VKBdevCfg may be closed manually if desired).
13) Done.
Calibration information is stored within the Gunfighter's BlackBox.
1) Don't use the native Windows calibration utility!
2) Use WIZZO GF Edition (http://ftp.vkb-sim.pro/Programms/wizzo_gf_0_98.zip) -- or -- VKBDevCfg w/ MCG support (http://ftp.vkb-sim.pro/Programms/VKBDev ... 83_8_5.zip) for calibration.
Note: Before continuing, ensure that the foldable trigger is in the center position (MCG PRO only)
3) Flip the foldable trigger in the up position (MCG PRO only).
4) Press the trigger, and then let go if it to return it to the center position (MCG PRO only).
5) Click ‘Start’ (calibration button) in WIZZO -- or -- click the ‘Start Calibr’ button in VKBdevCfg; the SYS LED on the Blackbox starts blinking (WIZZO displays CALIBRATING label).
6) Move the stick through its full range (pitch and roll axes).
7) Move MASTER MODE (РЕЖИМ КБО) ministick on the MCG’s head through its full range.
8 ) Move GATE CONT (УПРАВ СТРОБ) ministick on the MCG’s head through its full range.
9) Squeeze the BRAKE lever fully.
10) Move the foldable trigger forward and backward (full range) (MCG PRO only)
11) If VKB T-Rudders are connected to the Gunfighter's BlackBox - move the T-Rudder axis through its full range as well.
12) Click the 'STOP' button (WIZZO) -- or -- click the 'End Calibr' button (VKBdevCfg); the joystick will restart. WIZZO closes automatically (VKBdevCfg may be closed manually if desired).
13) Done.
Calibration information is stored within the Gunfighter's BlackBox.