Two stage trigger set up with buttonD

[AntzyClancy]

Can anybody help me with some trouble I’m having with setting up buttonD on my two stage trigger of the SCG. I set up the first stage to buttond as slave to the second stage with a 40 ms delay on the first stage and 80 ms delay on the second stage, which seems pretty standard in the manual and recommendations online. I made no other changes. What happens is no matter what I do when I press the second stage, the first stage goes off. If I press quickly, the second stage turns on as normal. If I pass slowly, the first stage goes on and then when I pull to the second stage, the second stage goes on and the first stage goes off. This is what I see in the test section anyway. Is anybody else had this problem? Does anybody know what I’m doing wrong? I can paste some pictures of the setup if needed. Thanks for your help.

[Ron61]

Attach your profile, it's hard to figure things out without it.

[AwesomeZoll]

Hello Guys,
I want to use my Galdiator EVO Standard trigger 1 and trigger 2 independently. Now, if I push the trigger all the way, it activates trigger 1+2. But in MSFS2024 career mode, I need only trigger 2 for some actions. I tried using Google and ChatGPT to set it in VKBdev, but it didn't work. I attached my profile. Many thanks for any help.

[Ron61]

I recommend trying the newer firmware and configurator from here.
Configure the settings as shown in the screenshot. Then, in the Button Test, when you quickly press and release the button, only the second button will work. The first button will work as usual.