VKB-SIM

Posted: **Sun Mar 09, 2025 23:21**

Software: v0.93.26
Firmware: v2.196

Issue: The Detent Set LED event for STECS does not trigger when the selected detent profile is active. I went back to 2.165 and the event didn't work either there.

: Set up LED event for each Detent set to make sure we catch any of the first five Detent Sets, on DNT LED.

: PimpMyStecs is disabled and Detent Set 2 is enabled

: Confirming with booleans no LED event fires

The DNT LED remains desperately dark:
https://imgur.com/fB0Suio

Posted: **Tue Mar 18, 2025 22:16**

https://www-njoy32-vkb--sim-pro.transla ... r_pto=wapp

Posted: **Fri Mar 21, 2025 1:44**

The Detent State LED events work flawlessly and react to the throttle's presence inside each virtual detent's zone.

What I cannot seem to get to work is the Detent Set event, which I assume should trigger depending on which Set is active (i.e. Detent Sets 1-5, the default color-coded detent 'profiles') , not which Virtual detent the throttle is on. It is not documented so I might, of course, be wrong in my assumption.

VKB-SIM

Detent Set LED event doesn't work

Detent Set LED event doesn't work

Re: Detent Set LED event doesn't work

Re: Detent Set LED event doesn't work